topic Re: Regarding Command View installation in HPE EVA Storage

Regarding Command View installation

Avi13 — Mon, 28 Dec 2020 17:11:31 GMT

Hi,

Please help me with solution for below queries.

1) Please help me with steps to install CV for HPE EVA storage in new VM (Management server). VM OS is 2012 and Our ESX version is 5.0. EVA models are P6500, 4400.
2) Is the fabric zoning required for new management server which is a VM to configure two storage arrays in CV.

Thanks.

Re: Regarding Command View installation

StorageMike — Fri, 08 Jan 2021 13:36:25 GMT

Take a look a the following - https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=c03472908

Re: Regarding Command View installation

Torsten. — Fri, 08 Jan 2021 16:36:24 GMT

Another bad news is - it is using Adobe Flash ...

Re: Regarding Command View installation

Avi13 — Tue, 19 Jan 2021 17:25:07 GMT

Hi,

Please help me here.
i have tried to install new CV software in new VM server but after sucessfull installtion of software i am unable to see the storage devices in the console in new server.

1) Please help with step by step procedure as how we need to start of installation on CV in new VM server(2012)
2) is there any work should be done at VMware side before we start of the CV installation in new server?

It would be great if any one help me here plz.