topic Re: HPE EVA P6000 Data Warehouse without Adobe Flash in HPE EVA Storage

HPE EVA P6000 Data Warehouse without Adobe Flash

sinkin_sy — Tue, 12 Jan 2021 07:47:37 GMT

Hello.

According to the notice from HPE (https://support.hpe.com/hpesc/public/docDisplay?docId=a00098979en_us&docLocale=en_US), work with the HPE EVA P6000 Data Warehouse is possible only through the Firefox browser. But support for the Adobe Flash technology used when working with this repository has ended (https://www.adobe.com/ru/products/flashplayer/end-of-life.html).

How can you work with HPE EVA P6000 Data Warehouse now?

Re: HPE EVA P6000 Data Warehouse without Adobe Flash

Torsten. — Wed, 13 Jan 2021 07:15:00 GMT

Try https://ruffle.rs/

Re: HPE EVA P6000 Data Warehouse without Adobe Flash

sinkin_sy — Wed, 13 Jan 2021 07:25:54 GMT

Yes, I've tried using ruffle, but it doesn't support ActionScript 3, which is required when the P6000 Command View starts. I also tried the Lightspark project (https://github.com/lightspark/lightspark) but the result is the same, the Command View hangs when I run it.

Re: HPE EVA P6000 Data Warehouse without Adobe Flash

ew39885783 — Wed, 13 Jan 2021 07:46:06 GMT

I'm in the same boat. Ruffle doesn't support ActionScript 3 yet.

I've managed to get partway by creating an mms.cfg file, and placing it in C:\windows\syswow64\macromed\flash, as described in
https://blogs.sap.com/2020/12/10/how-to-keep-enterprise-flash-applications-accessible-in-2021/

EOLUninstallDisable=1 SilentAutoUpdateEnable=0 EnableAllowList=1 AutoUpdateDisable=1 ErrorReportingEnable=1 AllowListUrlPattern=https://<ip address>:2374/

CV now loads the flash content, but the login prompt is shifted way over to the right, almost entirely off the screen. The usual login button is disabled, and there's a message in bold red text underneath that begins "Conne"

I seem to recall having a similar issue before, which I'd usually circumvent by logging in to port 2373 first then launching CV from there, but that trick doesn't seem to be working either.

Any suggestions?

Re: HPE EVA P6000 Data Warehouse without Adobe Flash

ricky_g — Tue, 19 Jan 2021 07:27:31 GMT

This is some serious BS HP for what is still supposed to be a supported system.....

I'm going to log a ticket and see what comes back as the official answer.....probably pony up for a $25k Harmon license but until then I've managed to get this working by using a combination of:

- the mms.cfg file highlighted here and on the SAP blog

- Firefox ESR

- an old NPAPI Flash plugin - v21

I've allowed ESR to patch itself up to 78.6.1esr to see if that broke anything and so far its OK. It's latest ESR and for now I've killed any further auto-updating.

The old plugin would be harder to find as I happened to have it lying around from a legacy SCCM deployment.....I doubt there are any official sources to get that from anymore.

Anyway I hope that helps somebody else as the mmc.cfg stuff did me

Re: HPE EVA P6000 Data Warehouse without Adobe Flash

ricky_g — Tue, 19 Jan 2021 07:35:45 GMT

Last part is you have to untick the plug-in option:

"Block dangerous and intrusive Flash content"

Ancient Command View EVA is now accesible again

Re: HPE EVA P6000 Data Warehouse without Adobe Flash

Torsten. — Tue, 19 Jan 2021 11:52:03 GMT

if you have a contract for P6000 HPE can give you the Harman solution. Ask HPE support.

Re: HPE EVA P6000 Data Warehouse without Adobe Flash

Nicklas Larsson — Wed, 20 Jan 2021 14:08:29 GMT

Hi,

I got it to work using the following software:
Firefox 84.0.2
Adobe Flash Player 32.0.0.465

First, I added TraceOutputEcho=1 to mms.cfg to see which URLs were blocked.
Then I navigated to https://<ip address>:2374/SPoG and looked for blocked URLs in the Firefox web console.
When I found a blocked URL, I added it to mms.cfg and restarted Firefox.
After this, everything worked fine until I restarted the server.
It turned out that 2 of the TCP ports were assigned at startup.
So I navigated to https://<ip address>:2374/Configuration and entered static ports for Unsecured Web Service Port and Secure Web Service Port, saved the changes and restarted the service.
I used 8080 and 8443, make sure the TCP ports are not used by anything else.

My mms.cfg looks something like this:

EOLUninstallDisable=1 SilentAutoUpdateEnable=0 AutoUpdateDisable=1 EnableAllowList=1 ErrorReportingEnable=1 TraceOutputEcho=1 AllowListUrlPattern=http://fpdownload.adobe.com/pub/swz/ AllowListUrlPattern=https://<ip address>:2372/ AllowListUrlPattern=https://<ip address>:2374/ AllowListUrlPattern=https://<ip address>:2376/ AllowListUrlPattern=https://<ip address>:2386/ AllowListUrlPattern=http://<ip address>:8080/ AllowListUrlPattern=https://<ip address>:8443/

Regards,
Nicklas

Re: HPE EVA P6000 Data Warehouse without Adobe Flash

ricky_g — Thu, 21 Jan 2021 03:57:53 GMT

Looks like....and the answer for those still using this product that hasn't reached EOSL who aren't paying for support.....

Any customers with inactive contract coverage requesting this package will need to consult with an HPE Pointnext Services sales representative about resuming contract coverage and required Return to Support coverage.

Sales tactic

Re: HPE EVA P6000 Data Warehouse without Adobe Flash

Denialmix — Sat, 23 Jan 2021 19:30:10 GMT

My updated solution:

https://community.hpe.com/t5/HPE-EVA-Storage/End-of-life-Flash-2021-Solution-for-Array-Based-Management-ABM/m-p/7118276/highlight/true#M68841

Re: HPE EVA P6000 Data Warehouse without Adobe Flash

dhill835 — Fri, 22 Jan 2021 17:32:49 GMT

The MMS.cfg changes gets me to the log in promt but I also have a greyed out OK buttom with in red "Failed to connect to Discovery. The Management Group (MG) certificate may not be installed. Please refer to help for more information:. I'm logged into the forever with IE so not sure if something else needs to be done. Anyone else have this and fixed?

Re: HPE EVA P6000 Data Warehouse without Adobe Flash

Denialmix — Sun, 24 Jan 2021 21:15:49 GMT

New config for IE only, edit yourABMorCVaddressIP, create or replace mms.cfg file and save it in C:\Windows\SysWOW64\Macromed\Flash

#Disable Automatic Updates
AutoUpdateDisable=1
SilentAutoUpdateEnable=0

#Disable prompts to uninstall Flash Player
EOLUninstallDisable=1

#Duplicate actionscript console output
#in browser's console for javascript
TraceOutputEcho=1

#Enable the AllowList feature
EnableAllowList=1
AllowListPreview=1
AllowListRootMovieOnly=1

#Pattern to enable Your Legacy Flash Web App:
AllowListUrlPattern=*://*.adobe.com/
AllowListUrlPattern=*://yourABMorCVaddressIP:2373/
AllowListUrlPattern=*://yourABMorCVaddressIP:2374/

Re: HPE EVA P6000 Data Warehouse without Adobe Flash

dhill835 — Sat, 23 Jan 2021 19:59:00 GMT

Thank you Denialmix this let me in.

Re: HPE EVA P6000 Data Warehouse without Adobe Flash

ricky_g — Sun, 24 Jan 2021 01:16:38 GMT

That also works for me with IE - excellent

Re: HPE EVA P6000 Data Warehouse without Adobe Flash

ricky_g — Sun, 24 Jan 2021 01:20:24 GMT

@dhill835 - you have to import it into Firefox's store:

Menu> Options > Privacy & Security> Certificates: View Certificates

Re: HPE EVA P6000 Data Warehouse without Adobe Flash

sinkin_sy — Mon, 25 Jan 2021 01:36:46 GMT

Yes, I also checked the Denialmix method, it works on IE and Windows 10 20H2, through the embedded Flash 32.0 r0.

But Microsoft plans to completely remove Flash from the system in the future (https://support.microsoft.com/en-us/topic/update-for-the-removal-of-adobe-flash-player-october-27-2020-931521b9 -075a-ce54-b9af-ff3d5da047d5), so it is not known how long this solution will take.

Thanks anyway Denialmix

Re: HPE EVA P6000 Data Warehouse without Adobe Flash

dhill835 — Mon, 25 Jan 2021 12:48:30 GMT

For me I have a VM now with all these settings. I also exported the VM with everything working so I can import back if needed. On the VM I set static IP with no gateway to prevent internet access and will not allow it to be updated (of cource it will be turned off unless needed).

Re: HPE EVA P6000 Data Warehouse without Adobe Flash

Denialmix — Mon, 25 Jan 2021 13:28:45 GMT

You must be talking about the KB4577586 that was released to remove Flash Player. This update is optional and should not be installed, but if so? In the old IE, the Flash Plugin is an Activex control, it is not incorporated. Save the installed Flash files from the directories:
C:\Windows\System32\Macromed\Flash
C:\Windows\SysWOW64\Macromed\Flash

Yes, if you install KB4577586, Flash will be removed!
Restore the files in their respective folders and register Flash.ocx in each directory.

At the command prompt:
cd C:\Windows\System32\Macromed\Flash
regsvr32 Flash.ocx
cd C:\Windows\SysWOW64\Macromed\Flash
regsvr32 Flash.ocx

Your Flash has been restored.

Re: HPE EVA P6000 Data Warehouse without Adobe Flash

Mr_Smith — Fri, 29 Jan 2021 14:23:21 GMT

It doesnt work for me.

would you please tell more detail how and what to do. Maybe some browser settings? I I enter http://10.7.232.233:2374/ in my browser, but it loads endlessly.

how to check that flаsh is on the computer?

Re: HPE EVA P6000 Data Warehouse without Adobe Flash

Denialmix — Sat, 30 Jan 2021 18:15:24 GMT

Working only https!!!

https://10.7.232.233:2374/