topic apply license to CommandView in HPE EVA Storage

apply license to CommandView

Carol Yu — Thu, 10 Jun 2004 14:00:54 GMT

Hi,

I have downloaded CommandView 1.07 and installed it. I was given a permanent license key from HP as a file cvkey.txt and was told to install with with "licUtil -I cvkey.txt HP_CommandView_SDM. But the system can't find licUtil.

What is the right way to apply license to CommandView?

Thanks a lot,
Carol

Re: apply license to CommandView

Uday_S_Ankolekar — Thu, 10 Jun 2004 14:33:44 GMT

licUtil file should be present in /opt/sanmgr/cssi/Licensing/sbin directory. Try running this by giving full path. Or you can also try this from commandview gui cmdviewVA opt/sanmgr/commandview/client/sbin directory.

-USA..

Re: apply license to CommandView

Felipe Martinez — Wed, 16 Jun 2004 15:21:56 GMT

Hello:

IÂ´m on the correct directory but allways than i use the command licUtil install licva.txt HP_CommandView_SDM the output is the same like if i use just licUtil, wath is wron

Re: apply license to CommandView

tangliang0755 — Wed, 06 May 2009 05:25:41 GMT

when you installed CommandView and you had not install software about CommandView,for example SSLIC etc.

Re: apply license to CommandView

tangliang0755 — Wed, 06 May 2009 05:26:21 GMT

These include
CMDVIEWSDM,
HPOVSAMJR,
HPOVSAMHA,
HPOVSAMDA,
HPOVSAMHB,
HPOVSAMSG,
HPOVLIC,
SSLIC,
SMI-S_VA.