topic Re: HSG80 Controller Test in HPE EVA Storage

HSG80 Controller Test

Nagori — Sun, 18 Jul 2004 22:32:12 GMT

Is there any tools or test for confirm that HSG80 Controller is functioning fine?

Re: HSG80 Controller Test

Abdul Rahiman — Mon, 19 Jul 2004 11:49:38 GMT

You can use utilities like FMU, VTDPY etc.. to get insight into the HSG80 controllers.

Refer teh documetn for more info.
http://h200002.www2.hp.com/bc/docs/support/UCR/SupportManual/TPM_ek-g80tr-sa-b01/TPM_ek-g80tr-sa-b01.pdf

regds,
Abdul.

Re: HSG80 Controller Test

RBaker — Tue, 20 Jul 2004 10:34:49 GMT

Based on your previous posts, I assume that you suspect your backup/link problems are due to HSG GLM port. Use of VTDPY with DISPLAY HOSTS should give you some indication with regards LR and LRR. The best bet for me would always be to telnet switch and use portshow, porterrshow and similar commands. From the last posts I would suggest that your problem lies elsewhere though, check your MDR/NSR firmware, check SSP/Zone settings to ensure that no other servers are messing around with your MDR/NSR (other than your backup server etc. as the same rules apply to a tape/ SCSI bridge as do a disk - not shared unless sharing software in place)