topic E-Port(segmented, incompatible) in HPE EVA Storage

E-Port(segmented, incompatible)

ahmad_10 — Tue, 27 Jul 2004 03:31:06 GMT

Problem Description:
We are trying to connect 2 SAN Switches through a fiber cable.

The status of the extension ports is the following on the
two switches: E-Port(segmented, incompatible)
This is found in the web administration tool when clicking on the interconnection port.

I got the following error in the error log:
Warning Fabric-segmented,3, port 7, ELP rejected

Regards,

Re: E-Port(segmented, incompatible)

Chris Bennett_9 — Tue, 27 Jul 2004 05:54:39 GMT

Have you verified your fabric domain ID's? For example, you cannot have one switch in domain 10 and another in 11 and then e-port the two switches.

Are these Brocade, Cisco or McData switches?

Re: E-Port(segmented, incompatible)

Uwe Zessin — Tue, 27 Jul 2004 06:01:33 GMT

But of course! Domain IDs must be unique in a fabric, because they are part of the 24-bit fibre channel address.

Re: E-Port(segmented, incompatible)

Stephen Kebbell — Tue, 27 Jul 2004 13:58:24 GMT

Hi,

what switches are your trying to connect?
This usually means some parameter is not correct on one switch. There are several parameters which much be identical on each switch (but NOT the Domain ID!)
There are some existing threads with similar problems:
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=553369
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=624939

If you're trying to connect a 1GBit and a 2GBit switch, I would guess that the PID parameter needs to be changed. Check the above links for more info.

Regards,
Stephen

Re: E-Port(segmented, incompatible)

David Child_1 — Wed, 28 Jul 2004 16:08:50 GMT

Also, you generally cannot have any identical zone names or zone set names.

To provide accurate information we would need to know what kind of switches these are.

David

Re: E-Port(segmented, incompatible)

Gordon Bloxham — Fri, 14 Jan 2005 04:32:04 GMT

Incompatible could be the VCS translation setting on the port. I have experienced this problem before.

Re: E-Port(segmented, incompatible)

PraveenKakani — Tue, 29 Oct 2019 15:05:32 GMT

SOme time you can also try portcfgislmode X 1.. make sure its ON