topic Re: netserver e60 nort booting in Netservers

netserver e60 nort booting

Efrem Pannell — Sun, 23 Dec 2001 14:49:33 GMT

I received an old e60 from my company becuase they decided to replace it with a new server. The IT person informed me that he was having a prblem gettng the server to boot up , so they decided to replace it. The PC doesn't power at all. Where can i get part numbers for replacement parts?? I want to invest in a new motherboard and power supply. Any information would be helpful.

Re: netserver e60 nort booting

Marino Meloni_1 — Mon, 24 Dec 2001 07:28:31 GMT

hi
here is the link where you can found any part number of any product in HP

http://partsurfer.hp.com

bye

marino

Re: netserver e60 nort booting

John Rogers_2 — Mon, 24 Dec 2001 07:37:23 GMT

Hi
I bought an LH3 Netserver and the navigator CD supplied was for an E60 netserver. You will need this CD to configure your server. Should you be able to obtain a Navigator CD for an LH3 Netserver, we should be able to do a swap. Then you will be able to re-confugure your E60 once you have replaced any faulty parts and the server should then boot.

Re: netserver e60 nort booting

Helen French — Mon, 24 Dec 2001 17:02:22 GMT

Hi,

Try this for a complete list of products and PN which supports Netserver E60:

http://netserver.hp.com/support/parts_service/parts_list/parts_tpl.asp?pid=E60

HTH,
Shiju

Re: netserver e60 nort booting

Terri Harris — Thu, 27 Dec 2001 17:39:23 GMT

Referring need for Navigator Cd:

The Navigator CD is not required to configure a NetServer. The only thing which cannot be done without the Navigator is to create a Utility partition.
Otherwise, all drivers and updates are on the HP web site.

Cheers! - Terri