topic Re: NetServer LH Pro Mirror-Raid 5 Help in Netservers

NetServer LH Pro Mirror-Raid 5 Help

Steven Chen_1 — Mon, 14 Jan 2002 16:53:39 GMT

Hi gurus,

I would appreciated it if someone could give me some procedures to break mirror (2 HDs) and then add 3 HDs for Raid 5 on HP netserver LHPro.

The server contains Exchange Server and its files. It is important that the files are not lost.

Any comment are appreciated.

Steven

Re: NetServer LH Pro Mirror-Raid 5 Help

Terri Harris — Mon, 14 Jan 2002 19:24:08 GMT

Do you have a hardware RAID configured (= RAID controller) or a software RAID (done with the operating system)?
If this is hardware RAID, what RAID controller is being used?

Re: NetServer LH Pro Mirror-Raid 5 Help

Marco Hogeveen — Tue, 15 Jan 2002 08:43:47 GMT

Steven,

If you have a Netraid configuration and the Mirror only has 1 logical drive, then you can just drag 'n drop the 3 extra disks to the logical drive (in Netraid Assistant) and migrate to RAID5.
The extra disk space will appear as unused space on the disk in disk administrator, so you can create a partition on it.

Marco.

Re: NetServer LH Pro Mirror-Raid 5 Help

Steven Chen_1 — Tue, 15 Jan 2002 13:56:13 GMT

Thanks for the help.

I have NetRaid, hardware raid controller. Do not remember what version is. Any detail procedures I should follow?

Thanks a lot.

Steven

Re: NetServer LH Pro Mirror-Raid 5 Help

Marco Hogeveen — Tue, 15 Jan 2002 14:11:25 GMT

Take a look at the Netraid User's Guide at http://netserver.hp.com/docs/download.asp?file=netrdusergd.pdf Chapter 6 tells you all about capacity expansion.

Marco.

Re: NetServer LH Pro Mirror-Raid 5 Help

Marino Meloni_1 — Tue, 15 Jan 2002 16:25:07 GMT

hi
first, I will be sure: you have 2 hdd in raid one (I suppose 4 GB) you need to expand your raid to reach a raid 5 with 2 + 3 hdd >> 5 hdd 4 gb >> 16 gbyte total capacity.

If this is the case, you didn't need to break the raid.

You have to Backup all your data (for precaution), then install netraid assistant, then start the program, it will perform a scan and dive you the situation of the hdd on the scsi channel, you should see two hdd configured a0-0 and a0-1 + tree hdd in ready.

you select the tree hdd in ready and drag/drop on the logical device, a pop-up window will ask you which kind of raid level you want to reach, you select 5 and tre operation will start.

this operation can also performed off-line, starting with cd-navigator and running netraid assistant (better from a last revision of cd)

bye

marino