https://community.hpe.com/t5/netservers/netserver-e45-workstation/m-p/2560143#M133 It could be possible, but finding drivers for it wouldn't be too easy. Althought 98 is PnP OS, some of the system was probably designed after the OS was distributed. Installing win2k may be easier, no guarentees. The E series servers are really high powered PC's, or were at the time of their release. ;) Wed, 01 Aug 2001 18:55:55 GMT Theo Hill_1 2001-08-01T18:55:55Z https://community.hpe.com/t5/netservers/netserver-e45-workstation/m-p/2560142#M132 Is it possible to convert a former server (Netserver E45) to a Windows 98 workstation? If so, do I need to make a change in BIOS Setup? Run FDISK and Format as usual? Wed, 01 Aug 2001 17:40:41 GMT https://community.hpe.com/t5/netservers/netserver-e45-workstation/m-p/2560142#M132 Steve Crawford 2001-08-01T17:40:41Z https://community.hpe.com/t5/netservers/netserver-e45-workstation/m-p/2560143#M133 It could be possible, but finding drivers for it wouldn't be too easy. Althought 98 is PnP OS, some of the system was probably designed after the OS was distributed. Installing win2k may be easier, no guarentees. The E series servers are really high powered PC's, or were at the time of their release. ;) Wed, 01 Aug 2001 18:55:55 GMT https://community.hpe.com/t5/netservers/netserver-e45-workstation/m-p/2560143#M133 Theo Hill_1 2001-08-01T18:55:55Z https://community.hpe.com/t5/netservers/netserver-e45-workstation/m-p/2560144#M134 Yes.<BR />After FDISK/Format load Win98. Thu, 02 Aug 2001 19:55:24 GMT https://community.hpe.com/t5/netservers/netserver-e45-workstation/m-p/2560144#M134 Russ Jaycox_1 2001-08-02T19:55:24Z