topic Re: EISA configuration utility in Netservers

EISA configuration utility

Keck — Mon, 04 Feb 2002 22:12:49 GMT

I have downloaded the "lcplusecu.exe" in order to access the EISA configuration utility, but it doesn't work. Any suggestion?

Please help! Thanks!

Re: EISA configuration utility

Marino Meloni_1 — Tue, 05 Feb 2002 08:13:32 GMT

hi
what is exacly your problem? you cannot create the ecu or you cannot boot whit it on your server?
ttry to clean the floppy drive, because lots of time problem is related to it.
bye
marino

Re: EISA configuration utility

Terri Harris — Tue, 05 Feb 2002 15:00:02 GMT

First, do you have a LC or a LC Plus? The BIOS and BIOS setup are different between these 2 NetServers. The last LC was 5/66. Beginning with the 5/75, the model is a LC Plus.
You need to download the corect exe for the BIOS, run this file - a program will start in a DOS window, prompting for a diskette. Create the disk and use it to boot from the NetServer.
Reply if you have any more questions!

Re: EISA configuration utility

Keck — Tue, 05 Feb 2002 19:35:09 GMT

I was not able to get into this utility until I followed your response. Thanks!

However, I don't know what to do once I am in the utility in order to get rid of the NVRam bad error message.

HELP, PLEASE!!!!!!!!!!!!

Re: EISA configuration utility

Marino Meloni_1 — Wed, 06 Feb 2002 08:12:38 GMT

hi
if you have started ECU, go in "view, edit detail",
look at your config, if all is ok, exit to first menu and do "exit and save"
this will recalculate your checksum and solve the bad config.
bye
marino