https://community.hpe.com/t5/netservers/5-66-lf-doesn-t-boot/m-p/2563586#M161 I bought old Netserver and the battery was empty. I changed battery and used newest ECU to configure BIOS. After configuration i don't get any errors it just doesn't boot.<BR /><BR />Boot message looks like this.<BR />------------------------------------- <BR />CPU = Pentium 66 MHz <BR />0000640K System RAM Passed <BR />0064512K Extended RAM Passed <BR />0256K Cache SRAM Passed <BR />System BIOS shadowed <BR />Video BIOS shadowed <BR />UMB upper limit segment address: F7AD<BR />-------------------------------------<BR /><BR />After that server doesn't do anything. I haven't installed any cards and SW1 switch is set to default. Thu, 09 Aug 2001 04:46:33 GMT Ossi Numminen_1 2001-08-09T04:46:33Z https://community.hpe.com/t5/netservers/5-66-lf-doesn-t-boot/m-p/2563586#M161 I bought old Netserver and the battery was empty. I changed battery and used newest ECU to configure BIOS. After configuration i don't get any errors it just doesn't boot.<BR /><BR />Boot message looks like this.<BR />------------------------------------- <BR />CPU = Pentium 66 MHz <BR />0000640K System RAM Passed <BR />0064512K Extended RAM Passed <BR />0256K Cache SRAM Passed <BR />System BIOS shadowed <BR />Video BIOS shadowed <BR />UMB upper limit segment address: F7AD<BR />-------------------------------------<BR /><BR />After that server doesn't do anything. I haven't installed any cards and SW1 switch is set to default. Thu, 09 Aug 2001 04:46:33 GMT https://community.hpe.com/t5/netservers/5-66-lf-doesn-t-boot/m-p/2563586#M161 Ossi Numminen_1 2001-08-09T04:46:33Z https://community.hpe.com/t5/netservers/5-66-lf-doesn-t-boot/m-p/2563587#M162 Might sound silly, but is there a HDD in it ? Does SCSI Bios see the drive ? If so, have you attempted to install an OS onto it ? Tue, 28 Aug 2001 18:10:28 GMT https://community.hpe.com/t5/netservers/5-66-lf-doesn-t-boot/m-p/2563587#M162 Bob Bell_1 2001-08-28T18:10:28Z