https://community.hpe.com/t5/netservers/lc2000-netraid-controller/m-p/2689516#M1891 when i try to upgrade a lc2000 form NT 4.0 to W2k, i get an error that there is not driver for the 4M-NetRAid-Controller, but there is no 4M-Controller, just a 1M-Controller. What can i do? Fri, 22 Mar 2002 19:58:27 GMT Thomas Mertl 2002-03-22T19:58:27Z https://community.hpe.com/t5/netservers/lc2000-netraid-controller/m-p/2689516#M1891 when i try to upgrade a lc2000 form NT 4.0 to W2k, i get an error that there is not driver for the 4M-NetRAid-Controller, but there is no 4M-Controller, just a 1M-Controller. What can i do? Fri, 22 Mar 2002 19:58:27 GMT https://community.hpe.com/t5/netservers/lc2000-netraid-controller/m-p/2689516#M1891 Thomas Mertl 2002-03-22T19:58:27Z https://community.hpe.com/t5/netservers/lc2000-netraid-controller/m-p/2689517#M1892 Thomas,<BR /><BR />Try this,<BR /><BR />Go to start, setteings, control panel<BR />Open Devices<BR />Look for the following four devices:<BR /> hpndisk<BR /> hpncomm<BR /> hpnport<BR /> hpn<BR /><BR />Disable these devices one at a time (not all may be present) Then click the disable radio button for HPN<BR /><BR />Click OK<BR /><BR />Restart server<BR />Do Not run the W2kSetup.bat on the W2K drivers diskette<BR /><BR />Begin Windows 2000 upgrade..<BR /><BR />If this fails it would be best to reinitialize and reinstall the array.. Be Happy with Your Backup before starting this process!<BR /><BR />Ciao,<BR />Greg<BR /><BR /> Fri, 22 Mar 2002 20:31:15 GMT https://community.hpe.com/t5/netservers/lc2000-netraid-controller/m-p/2689517#M1892 Greg Carlson 2002-03-22T20:31:15Z