https://community.hpe.com/t5/netservers/help-booting-hp-netserver-ldpro/m-p/2692242#M1937 F.Pastor,<BR /><BR />The Bios is not F2 accessable.. you need the ECU to access the Eisa Config Utility. You can get it from <A href="http://www.hp.com" target="_blank">http://www.hp.com</A> if you don't have the nav cd. Here is the link directly to the download/driver page for the LD pro: <A href="http://h20004.www2.hp.com/keeper_rnotes/bsdmatrix/matrix50444.html" target="_blank">http://h20004.www2.hp.com/keeper_rnotes/bsdmatrix/matrix50444.html</A><BR /><BR />Make sure that your cable is seated on the CD-Rom and the scsi controller as well. <BR /><BR />I would recommend setting switch 4 to off to clear the config. Then after clear config message appears power back off and set switch 4 back to on. Then boot to the ECU diskette and verify settings and save and exit. Then flash BIOS.<BR /><BR />Ciao,<BR />Greg Wed, 27 Mar 2002 21:54:23 GMT Greg Carlson 2002-03-27T21:54:23Z https://community.hpe.com/t5/netservers/help-booting-hp-netserver-ldpro/m-p/2692241#M1936 I??ve bought a second hand HP Netserver LDPro. I try loading windows 2000<BR />but its not any way to find or format the hard disc, and the system can't<BR />find the CD. I tried even with the bootable diskette of win 98 or 2000.<BR />Looks the server is bootable only from A and I dont know how to access the<BR />bios to change that. The HP Netserver navigator CD untill now its also<BR />unuseful. Any help?<BR />Many thanks. Wed, 27 Mar 2002 20:39:05 GMT https://community.hpe.com/t5/netservers/help-booting-hp-netserver-ldpro/m-p/2692241#M1936 F.Pastor 2002-03-27T20:39:05Z https://community.hpe.com/t5/netservers/help-booting-hp-netserver-ldpro/m-p/2692242#M1937 F.Pastor,<BR /><BR />The Bios is not F2 accessable.. you need the ECU to access the Eisa Config Utility. You can get it from <A href="http://www.hp.com" target="_blank">http://www.hp.com</A> if you don't have the nav cd. Here is the link directly to the download/driver page for the LD pro: <A href="http://h20004.www2.hp.com/keeper_rnotes/bsdmatrix/matrix50444.html" target="_blank">http://h20004.www2.hp.com/keeper_rnotes/bsdmatrix/matrix50444.html</A><BR /><BR />Make sure that your cable is seated on the CD-Rom and the scsi controller as well. <BR /><BR />I would recommend setting switch 4 to off to clear the config. Then after clear config message appears power back off and set switch 4 back to on. Then boot to the ECU diskette and verify settings and save and exit. Then flash BIOS.<BR /><BR />Ciao,<BR />Greg Wed, 27 Mar 2002 21:54:23 GMT https://community.hpe.com/t5/netservers/help-booting-hp-netserver-ldpro/m-p/2692242#M1937 Greg Carlson 2002-03-27T21:54:23Z