https://community.hpe.com/t5/netservers/e800-will-not-enter-setup/m-p/2568302#M194 I have a used E800. It comes up (no disk installed yet), but will not enter setup or boot the navigator CD. Will enter SCSI adapter bios. I have tried to reset the config and the password without any effect.<BR /><BR />Any ideas? Any suggestions of things to try? Wed, 22 Aug 2001 01:17:05 GMT David Mabo_1 2001-08-22T01:17:05Z https://community.hpe.com/t5/netservers/e800-will-not-enter-setup/m-p/2568302#M194 I have a used E800. It comes up (no disk installed yet), but will not enter setup or boot the navigator CD. Will enter SCSI adapter bios. I have tried to reset the config and the password without any effect.<BR /><BR />Any ideas? Any suggestions of things to try? Wed, 22 Aug 2001 01:17:05 GMT https://community.hpe.com/t5/netservers/e800-will-not-enter-setup/m-p/2568302#M194 David Mabo_1 2001-08-22T01:17:05Z https://community.hpe.com/t5/netservers/e800-will-not-enter-setup/m-p/2568303#M195 Turns out it is an E60, and when I put different memory in, it worked. Someone put an E800 front on an E60. Does not like E800 memory.<BR /><BR /> Thu, 23 Aug 2001 03:55:45 GMT https://community.hpe.com/t5/netservers/e800-will-not-enter-setup/m-p/2568303#M195 David Mabo_1 2001-08-23T03:55:45Z