topic Re: System halted in Netservers

System halted

F.Pastor — Sat, 30 Mar 2002 12:48:57 GMT

Trying to install NT 4 workstation, but with this error: DAC960P BIOS call in protected mode: cannot continue. System halted

Re: System halted

Greg Carlson — Sat, 30 Mar 2002 13:36:25 GMT

F.Pastor,

Are you trying to install workstation on your LDpro? That error appears to be related to a Mylex card so I would start by doing a manual install of your OS. Make sure that you skip detection and load your HP drivers instead of MS default drivers. Grab the mylex driver here: http://www.hp.com/bizsupport/servers/hp_server_accessories.html ** The Mylex card is the HPDA driver option--> do you have a pci or eisa based Mylex? **

Ciao,
Greg

Re: System halted

Theo Hill_1 — Mon, 01 Apr 2002 17:21:01 GMT

Are you installing NT workstation or NT server? Workstation is not supported.

http://netserver.hp.com/support/nos_matrix/retiredkmatrx.asp