https://community.hpe.com/t5/netservers/capacity-reduction-on-integrated-netraid/m-p/2697341#M2010 Once you've added disks to an array, you can't remove them.<BR /><BR />Your only option at this point is to do a complete backup of your data and then clear the array config. Then you have to create a new array using just 3 of the drives, reinstall your OS and restore your data from from backup. Thu, 04 Apr 2002 18:56:36 GMT Alicia White 2002-04-04T18:56:36Z https://community.hpe.com/t5/netservers/capacity-reduction-on-integrated-netraid/m-p/2697340#M2009 I have a RAID5 array with 4 9GB drives on a netserver LH4 with integrated NetRAID. I have reduced the size of the data to less than 9gb, and I would like to remove one of the drives from the array for use in another array. I would like the end result of this array to be a RAID5 with three of the drives with the 8GB of data left intact. Can I do this? If so, How? Thu, 04 Apr 2002 17:35:15 GMT https://community.hpe.com/t5/netservers/capacity-reduction-on-integrated-netraid/m-p/2697340#M2009 Michael Schmalz 2002-04-04T17:35:15Z https://community.hpe.com/t5/netservers/capacity-reduction-on-integrated-netraid/m-p/2697341#M2010 Once you've added disks to an array, you can't remove them.<BR /><BR />Your only option at this point is to do a complete backup of your data and then clear the array config. Then you have to create a new array using just 3 of the drives, reinstall your OS and restore your data from from backup. Thu, 04 Apr 2002 18:56:36 GMT https://community.hpe.com/t5/netservers/capacity-reduction-on-integrated-netraid/m-p/2697341#M2010 Alicia White 2002-04-04T18:56:36Z