https://community.hpe.com/t5/netservers/boot-ini-ntoskernel-problem/m-p/2698042#M2016 You should be able to do a repair install taht will allow you to copy those files over. Just boot to the win2k CD and select repair install. Fri, 05 Apr 2002 17:00:53 GMT Theo Hill_1 2002-04-05T17:00:53Z https://community.hpe.com/t5/netservers/boot-ini-ntoskernel-problem/m-p/2698041#M2015 Hello all,<BR /><BR />I have some LC2000 Netservers that at boot up came on with boot.ini not found and restore a copy of ntoskernel<BR />How do I resolve this issue? Do I have to restore win2000 Advanced server. The hard disks are on a raid card and configured to raid zero. Since I connected the cable to the board directly (bypassing the raid card) I have not had these boot problems. Fri, 05 Apr 2002 15:23:30 GMT https://community.hpe.com/t5/netservers/boot-ini-ntoskernel-problem/m-p/2698041#M2015 CHRIS_ANORUO 2002-04-05T15:23:30Z https://community.hpe.com/t5/netservers/boot-ini-ntoskernel-problem/m-p/2698042#M2016 You should be able to do a repair install taht will allow you to copy those files over. Just boot to the win2k CD and select repair install. Fri, 05 Apr 2002 17:00:53 GMT https://community.hpe.com/t5/netservers/boot-ini-ntoskernel-problem/m-p/2698042#M2016 Theo Hill_1 2002-04-05T17:00:53Z https://community.hpe.com/t5/netservers/boot-ini-ntoskernel-problem/m-p/2698043#M2017 The problem has been traced to a disk failure. replaced the disk and connected the scsi cable to the board and not the raid card. Mon, 15 Apr 2002 11:27:02 GMT https://community.hpe.com/t5/netservers/boot-ini-ntoskernel-problem/m-p/2698043#M2017 CHRIS_ANORUO 2002-04-15T11:27:02Z