<?xml version="1.0" encoding="UTF-8"?>
<rss xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns:taxo="http://purl.org/rss/1.0/modules/taxonomy/" version="2.0">
  <channel>
    <title>topic LHpro RAID oddities? in Netservers</title>
    <link>https://community.hpe.com/t5/netservers/lhpro-raid-oddities/m-p/2701268#M2041</link>
    <description>recently got the PCI HPDA for my dual PPro Netserver being a relabled Mylex DAC960PL with some HP FW. Till then I had all drives (1x1GB Seagate Hawk, 4x 2GB HP Barracuda, 1x 4GB HP Atlas II) connected to the onboard adaptec. Now connected to the HPDA: Running Jetset results in not being able to create a drive due to non same size drives, so I removed 1GB and 4GB and set up a 6GB RAID 5. Trying to run Mylex  DACCF resulted in the SW not detecting any of the 2GB drives, only 1GB and 4GB are detected.&lt;BR /&gt;Now I swapped the Controller Firmware to Mylex to get LINUX support the DAC 960 PL card:&lt;BR /&gt;DACCF detects the 1GB drive as the only drive, all hp drives take quite some time for SCSI inquiery but none is detected.&lt;BR /&gt;I had to replace all the hp drives to get a working RAID set up. Now the machine runs LINUX fine with an array of 2GB Conner drives</description>
    <pubDate>Thu, 11 Apr 2002 09:08:02 GMT</pubDate>
    <dc:creator>Gereon Wenzel</dc:creator>
    <dc:date>2002-04-11T09:08:02Z</dc:date>
    <item>
      <title>LHpro RAID oddities?</title>
      <link>https://community.hpe.com/t5/netservers/lhpro-raid-oddities/m-p/2701268#M2041</link>
      <description>recently got the PCI HPDA for my dual PPro Netserver being a relabled Mylex DAC960PL with some HP FW. Till then I had all drives (1x1GB Seagate Hawk, 4x 2GB HP Barracuda, 1x 4GB HP Atlas II) connected to the onboard adaptec. Now connected to the HPDA: Running Jetset results in not being able to create a drive due to non same size drives, so I removed 1GB and 4GB and set up a 6GB RAID 5. Trying to run Mylex  DACCF resulted in the SW not detecting any of the 2GB drives, only 1GB and 4GB are detected.&lt;BR /&gt;Now I swapped the Controller Firmware to Mylex to get LINUX support the DAC 960 PL card:&lt;BR /&gt;DACCF detects the 1GB drive as the only drive, all hp drives take quite some time for SCSI inquiery but none is detected.&lt;BR /&gt;I had to replace all the hp drives to get a working RAID set up. Now the machine runs LINUX fine with an array of 2GB Conner drives</description>
      <pubDate>Thu, 11 Apr 2002 09:08:02 GMT</pubDate>
      <guid>https://community.hpe.com/t5/netservers/lhpro-raid-oddities/m-p/2701268#M2041</guid>
      <dc:creator>Gereon Wenzel</dc:creator>
      <dc:date>2002-04-11T09:08:02Z</dc:date>
    </item>
    <item>
      <title>Re: LHpro RAID oddities?</title>
      <link>https://community.hpe.com/t5/netservers/lhpro-raid-oddities/m-p/2701269#M2042</link>
      <description>I know the atlas and baraccuda drives both had some firmware updates...did you happen to look at upgrading those?&lt;BR /&gt;&lt;A href="http://h20004.www2.hp.com/keeper_rnotes/bsdmatrix/matrix65146.html" target="_blank"&gt;http://h20004.www2.hp.com/keeper_rnotes/bsdmatrix/matrix65146.html&lt;/A&gt;</description>
      <pubDate>Sat, 13 Apr 2002 00:56:23 GMT</pubDate>
      <guid>https://community.hpe.com/t5/netservers/lhpro-raid-oddities/m-p/2701269#M2042</guid>
      <dc:creator>Chris Blumenshine</dc:creator>
      <dc:date>2002-04-13T00:56:23Z</dc:date>
    </item>
  </channel>
</rss>

