topic LC2000U3 Poor Performance? in Netservers https://community.hpe.com/t5/netservers/lc2000u3-poor-performance/m-p/2709828#M2191 I have recently install 2 x LC2000U3 P-III 1G Netservers relacing 2 x old Pentium-II 300 level servers, and to my surprise both offer very poor "system" performance relative to older slower equipment replaced. <BR /><BR />First LC2000U3 is running Microsoft BackOffice 2000 with 30-40 users, and the second runs SCO OpenServer 5.0.6 with 10-15 users. Both LC2000U3's are preconfigured model 54's (3 x 18.2 10K H/S) NetRaid 1M, RAM sizes are 640MB and 256MB (HP ECC) respectively. I have tried stripe sizes at 4K and 64K on RAID5 setting.<BR /><BR />HP technical support in Australia tells me I am on latest NetRaid firmware and system BIOS levels.<BR /><BR />Both (different) sets of users are disenchanted with performance of the new "systems" since the changeover. I am baffled because previous Netserver experience has always been wonderful.<BR /><BR />Could anyone please direct me to someone who can offer some serious performance assistance with LC2000U3 and/or NetRaid 1M arrays? Wed, 24 Apr 2002 08:45:24 GMT Vic Wilson 2002-04-24T08:45:24Z LC2000U3 Poor Performance? https://community.hpe.com/t5/netservers/lc2000u3-poor-performance/m-p/2709828#M2191 I have recently install 2 x LC2000U3 P-III 1G Netservers relacing 2 x old Pentium-II 300 level servers, and to my surprise both offer very poor "system" performance relative to older slower equipment replaced. <BR /><BR />First LC2000U3 is running Microsoft BackOffice 2000 with 30-40 users, and the second runs SCO OpenServer 5.0.6 with 10-15 users. Both LC2000U3's are preconfigured model 54's (3 x 18.2 10K H/S) NetRaid 1M, RAM sizes are 640MB and 256MB (HP ECC) respectively. I have tried stripe sizes at 4K and 64K on RAID5 setting.<BR /><BR />HP technical support in Australia tells me I am on latest NetRaid firmware and system BIOS levels.<BR /><BR />Both (different) sets of users are disenchanted with performance of the new "systems" since the changeover. I am baffled because previous Netserver experience has always been wonderful.<BR /><BR />Could anyone please direct me to someone who can offer some serious performance assistance with LC2000U3 and/or NetRaid 1M arrays? Wed, 24 Apr 2002 08:45:24 GMT https://community.hpe.com/t5/netservers/lc2000u3-poor-performance/m-p/2709828#M2191 Vic Wilson 2002-04-24T08:45:24Z