topic Re: AFT on Windows 2000 in Netservers

AFT on Windows 2000

Alejandro Benitez_1 — Wed, 24 Apr 2002 20:07:54 GMT

Ok!
Works great...
I can add my two onboard cards to a team, but How to set up a virtual IP fot Fault tolerance ?
First the IP is "Not Assigned" then the W2K set an APIPA IP (169.254.....)

Thanks!
Alejandro

Re: AFT on Windows 2000

Greg Carlson — Wed, 24 Apr 2002 21:21:48 GMT

Alejandro,

Check out this post on the very same issue. This should help you out..

Ciao,
Greg

Re: AFT on Windows 2000

Greg Carlson — Wed, 24 Apr 2002 21:22:35 GMT

Alejandro,

Sorry.. forgot to paste the link in the last post.

http://groups.google.com/groups?q=%22virtual+IP%22+aft&hl=en&selm=fa.kb5dsrv.ohsjal%40ifi.uio.no&rnum=1

Ciao,
Greg

Re: AFT on Windows 2000

Alejandro Benitez_1 — Wed, 24 Apr 2002 22:11:09 GMT

ok, ok....
Sorry, but when I finished the "New Message" I saw that this would be an answer...
but it was to late.
sorry again...

Ok, the link was great...

Another one, on the lp1000r what is better to use PRO SET I or PRO SET II, i don't know if the lp1000r's nics support PRO SET II.
I installed PRO SET II downloaded from INTEL over PRO SET I, but doesn't work.

Tomorrow I'll try with your google link and if INTEL PRO SET I works ok..

Thanks again...
This is finnaly an answer
Alejandro

Re: AFT on Windows 2000

Theo Hill_1 — Thu, 25 Apr 2002 14:33:28 GMT

if the NIC driver you are using is the E100BNT5.sys then use Pro Set II. If you are using the HPTXNT5.sys, use HP set.