https://community.hpe.com/t5/netservers/toptools-agent-5-52-lc3-netserver/m-p/2713885#M2252 I Instaled TopTools agent 5.52 on LC3 Netserver with Wndows 2000 SP2 AND after this intall the CPU Utilization is 100%. Tue, 30 Apr 2002 09:52:56 GMT moti 2002-04-30T09:52:56Z https://community.hpe.com/t5/netservers/toptools-agent-5-52-lc3-netserver/m-p/2713885#M2252 I Instaled TopTools agent 5.52 on LC3 Netserver with Wndows 2000 SP2 AND after this intall the CPU Utilization is 100%. Tue, 30 Apr 2002 09:52:56 GMT https://community.hpe.com/t5/netservers/toptools-agent-5-52-lc3-netserver/m-p/2713885#M2252 moti 2002-04-30T09:52:56Z https://community.hpe.com/t5/netservers/toptools-agent-5-52-lc3-netserver/m-p/2713886#M2253 hi<BR /><BR />check in task manager which is the task who keep lot of resources.<BR />usualy the cause can be due to a problem at the managment level.<BR />to solve try to perform a "reset managment"<BR />this can be performed shutting down the server, disconecting power cable, lan cable, serial and parallel cable if connected.<BR />let server without power for a few minut and reboot.<BR />this will clear the managment menory and free up any conflict at that level, so the agents could communicate again with the hardware<BR /><BR />bye<BR /><BR />marino Tue, 30 Apr 2002 12:12:26 GMT https://community.hpe.com/t5/netservers/toptools-agent-5-52-lc3-netserver/m-p/2713886#M2253 Marino Meloni_1 2002-04-30T12:12:26Z