https://community.hpe.com/t5/netservers/netserver-e800-on-w2k-slow-w-win98-workstations/m-p/2776984#M3075 I just setup a Netserver E800 with W2K Server to work with an E50 (W-NT4) network. I needed the new server to run a modern program and must keep old server to run legacy programs. The workstations are vectra (P-II 333) w/Win 98. I have very slow interactions with workstations and new server. Help!!!! Wed, 31 Jul 2002 18:25:51 GMT Todd Reeb 2002-07-31T18:25:51Z https://community.hpe.com/t5/netservers/netserver-e800-on-w2k-slow-w-win98-workstations/m-p/2776984#M3075 I just setup a Netserver E800 with W2K Server to work with an E50 (W-NT4) network. I needed the new server to run a modern program and must keep old server to run legacy programs. The workstations are vectra (P-II 333) w/Win 98. I have very slow interactions with workstations and new server. Help!!!! Wed, 31 Jul 2002 18:25:51 GMT https://community.hpe.com/t5/netservers/netserver-e800-on-w2k-slow-w-win98-workstations/m-p/2776984#M3075 Todd Reeb 2002-07-31T18:25:51Z https://community.hpe.com/t5/netservers/netserver-e800-on-w2k-slow-w-win98-workstations/m-p/2776985#M3076 Todd,<BR /><BR />Is the server itself running at a "normal speed" or is it slow as well? What driver and what Nic are you using on the E800? Look at this post on NIC drivers for win2k: <A href="http://bizforums.itrc.hp.com/cm/QuestionAnswer/0,,0x181c8f960573d611abdb0090277a778c,00.html" target="_blank">http://bizforums.itrc.hp.com/cm/QuestionAnswer/0,,0x181c8f960573d611abdb0090277a778c,00.html</A><BR /><BR />The last question is how is your router, switch or hub configured? Is it set to auto negotiate or is it set at 10mb/s? <BR /><BR />Ciao,<BR />Greg<BR /> Thu, 01 Aug 2002 02:05:19 GMT https://community.hpe.com/t5/netservers/netserver-e800-on-w2k-slow-w-win98-workstations/m-p/2776985#M3076 Greg Carlson 2002-08-01T02:05:19Z