topic Multiprocessor mode is not working... in Netservers

Multiprocessor mode is not working...

Antony Durocher — Wed, 19 Sep 2001 18:23:35 GMT

I use a Hp LH-II Netserver running with 2 intel PentiumII-300Mhz. It can't be run as multiprocessor neither at startup (bios) or as Nt4 or Netware server. I get the following message at bootup: "Missing Bios Update Data Bloc for Cpu while I'm using latest bios and Ecu. What can I do.
Thank you.

Re: Multiprocessor mode is not working...

Krzysztof Marczak — Thu, 20 Sep 2001 12:38:47 GMT

What Multiprocessing specification you use. Should be a MP 1.4 for Windows. You can check and change in BIOS->Configure computer->Run Configuration Utility->Advanced EISA Configuration->View or Edit Details->EISA NMI Control->MP Specification.
What BIOS version you have. The newest is 4.05.20

Re: Multiprocessor mode is not working...

Antony Durocher — Thu, 20 Sep 2001 13:31:15 GMT

I already use MP v1.4 and bios 4.05.20

Re: Multiprocessor mode is not working...

Diana Thompson — Thu, 20 Sep 2001 18:20:47 GMT

Try clearing the CMOS, flash the bios again, then go into the ECU and see if it see's 2 processors.

Diana
NSD Support

Re: Multiprocessor mode is not working...

Antony Durocher — Fri, 21 Sep 2001 13:14:00 GMT

I have already done that too !!!