https://community.hpe.com/t5/netservers/installing-a-modem-in-lc2000/m-p/2797437#M3247 Hi, if you use COM2, perhaps the port is configured in BIOS to work as an remote administration port. If so, change the mode for COM2 in BIOS.<BR /><BR />//Urban Mon, 02 Sep 2002 07:02:58 GMT Urban Persson_1 2002-09-02T07:02:58Z https://community.hpe.com/t5/netservers/installing-a-modem-in-lc2000/m-p/2797435#M3245 I have installed a modem into an HP Netserver LC2000, but I cannot get the system to use or acknowledge the modem. My fax software shows that the device has Quit. Is there anything specific about this task i.e. modem brand, type, etc.? Fri, 30 Aug 2002 11:47:12 GMT https://community.hpe.com/t5/netservers/installing-a-modem-in-lc2000/m-p/2797435#M3245 Caron Lacy 2002-08-30T11:47:12Z https://community.hpe.com/t5/netservers/installing-a-modem-in-lc2000/m-p/2797436#M3246 What are you doing with IRQs? Did you disable a com port in the BIOS? Mon, 02 Sep 2002 05:15:51 GMT https://community.hpe.com/t5/netservers/installing-a-modem-in-lc2000/m-p/2797436#M3246 Ben_16 2002-09-02T05:15:51Z https://community.hpe.com/t5/netservers/installing-a-modem-in-lc2000/m-p/2797437#M3247 Hi, if you use COM2, perhaps the port is configured in BIOS to work as an remote administration port. If so, change the mode for COM2 in BIOS.<BR /><BR />//Urban Mon, 02 Sep 2002 07:02:58 GMT https://community.hpe.com/t5/netservers/installing-a-modem-in-lc2000/m-p/2797437#M3247 Urban Persson_1 2002-09-02T07:02:58Z