https://community.hpe.com/t5/netservers/pent-pro-200-lh-pro-netserver/m-p/2833989#M3626 LX Pro, not LH, my mistake. Mon, 28 Oct 2002 01:58:07 GMT Aaron Burkey 2002-10-28T01:58:07Z https://community.hpe.com/t5/netservers/pent-pro-200-lh-pro-netserver/m-p/2833988#M3625 I've got a '96 Netserver that has 4 512kb 200 cpu's and have a set of 4 1mb 200's with matched stepping I'd like to install. There seems to be 2 different styles of cpu boards for these systems as the extra cpu board I received with the set of cpu's I purchased has a jumper for the cpu cache. Neither board that are in the system board currently have this jumper and when I tried the 1 mb cpu's, the system gave an unsupported cpu error. I'm wondering if I can get past this if I install the newer, jumper style boards that seem to support the 1mb versions since "1mb" is an optional setting. Did I word that question understandably?!! If so, ...HELP!!! Thanks! Mon, 28 Oct 2002 01:09:51 GMT https://community.hpe.com/t5/netservers/pent-pro-200-lh-pro-netserver/m-p/2833988#M3625 Aaron Burkey 2002-10-28T01:09:51Z https://community.hpe.com/t5/netservers/pent-pro-200-lh-pro-netserver/m-p/2833989#M3626 LX Pro, not LH, my mistake. Mon, 28 Oct 2002 01:58:07 GMT https://community.hpe.com/t5/netservers/pent-pro-200-lh-pro-netserver/m-p/2833989#M3626 Aaron Burkey 2002-10-28T01:58:07Z https://community.hpe.com/t5/netservers/pent-pro-200-lh-pro-netserver/m-p/2833990#M3627 if you install 4x 1mb procs, then it should work. don't mix 512kb cpu with 1mb, even on 2 different boards.<BR /><BR />good luck<BR />petr Mon, 04 Nov 2002 15:36:35 GMT https://community.hpe.com/t5/netservers/pent-pro-200-lh-pro-netserver/m-p/2833990#M3627 petr jaeger 2002-11-04T15:36:35Z