https://community.hpe.com/t5/netservers/add-a-hdd-to-e800-netserver/m-p/2838272#M3669 I have a e800 netserver with a netraid 1m card and 3 9Go hdd in raid 5.<BR />I want to add a 18Go hdd in jbod.<BR />I have installed it in the netserver and i can see it in "ready" state with netraid assistant.<BR />What do I have to do to format it : I can't see any option in netraid assistant.<BR />Sorry for my poor english and<BR />Thank you. Mon, 04 Nov 2002 11:38:02 GMT St_8 2002-11-04T11:38:02Z https://community.hpe.com/t5/netservers/add-a-hdd-to-e800-netserver/m-p/2838272#M3669 I have a e800 netserver with a netraid 1m card and 3 9Go hdd in raid 5.<BR />I want to add a 18Go hdd in jbod.<BR />I have installed it in the netserver and i can see it in "ready" state with netraid assistant.<BR />What do I have to do to format it : I can't see any option in netraid assistant.<BR />Sorry for my poor english and<BR />Thank you. Mon, 04 Nov 2002 11:38:02 GMT https://community.hpe.com/t5/netservers/add-a-hdd-to-e800-netserver/m-p/2838272#M3669 St_8 2002-11-04T11:38:02Z https://community.hpe.com/t5/netservers/add-a-hdd-to-e800-netserver/m-p/2838273#M3670 Since the 18 GB hard drive is connected to a RAID controller, it must be configured into a NetRAID array. With one hard drive there is only one option, which is to put it into a RAID 0. Create a new RAID 0. You will then have a RAID 5 and a RAID 0. Thu, 07 Nov 2002 14:51:05 GMT https://community.hpe.com/t5/netservers/add-a-hdd-to-e800-netserver/m-p/2838273#M3670 Terri Harris 2002-11-07T14:51:05Z https://community.hpe.com/t5/netservers/add-a-hdd-to-e800-netserver/m-p/2838274#M3671 thank you, it works... I just did not find the wizard button... Thu, 07 Nov 2002 16:24:18 GMT https://community.hpe.com/t5/netservers/add-a-hdd-to-e800-netserver/m-p/2838274#M3671 St_8 2002-11-07T16:24:18Z