topic Re: W2K hangs during installation on NetServer E60 in Netservers

W2K hangs during installation on NetServer E60

Dmitry_8 — Thu, 27 Sep 2001 13:55:14 GMT

Hello!

I have a problem: during installation W2K on NetServer E60 the system hangs during the DOS part of setup. My server has a SCSI disk (on Adaptec AIC 7895 host adapter), and the system does not recognise it, so I have to add the driver by hand. I add the aic78xx.sys driver using the F6 option, after that the setup program goes further and hangs on when shows message: "Starting Windows 2000" ...

I suspect I have to add a SPECIAL driver for the SCSI adapter (because this adapter is integrated) but I could not find it anywhere. Could anybody help me? I'd be very grateful for any valuable information.

Yours Dmitry

Re: W2K hangs during installation on NetServer E60

Marino Meloni_1 — Thu, 27 Sep 2001 14:29:42 GMT

hi
you only need the driver you can found on the hp site at the following URL,
note that you need also to have the last Bios version on your server , you can found it at the same urlhttp://www.hp.com/cposupport/swindexes/hpnetserve11022_swen.html
bye
marino

Re: W2K hangs during installation on NetServer E60

Dmitry_8 — Thu, 27 Sep 2001 14:45:13 GMT

Dear Marino, thank you very much for your kind answer!

But the problem is that the drivers package that is located at the URL you indicated contains only drivers for NetRAID and network card. But i dont have any RAIDs... And is it so that BIOS is necessarily to be updated? After all, Navigator CD includes W2K part, so the server BIOS must match this OS...

Re: W2K hangs during installation on NetServer E60

Theo Hill_1 — Thu, 27 Sep 2001 15:05:12 GMT

Yes, it is very important to upgrade your BIOS to the latest. Win2k works differently than NT at the BIOS level, therefor the update is required. Also, try making the partition you are installing to less than or equal to 2 GB. Here is the link for the BIOS:

http://www.hp.com/cgi-bin/cposupport/swindex.pl?p=hpnetserve11022&l=en&c=BIOS

Re: W2K hangs during installation on NetServer E60

Joe Colucci_1 — Fri, 28 Sep 2001 13:09:40 GMT

Dmitry,

Are you starting the install from the Navigator CD, or just trying to start with the W2K CD? If you are not starting with the Navigator CD, try doing so and stepping through that process.

I apologize if this information is elementary.

--Joe

Re: W2K hangs during installation on NetServer E60

Dmitry_8 — Fri, 28 Sep 2001 14:34:31 GMT

Yes, I should have updated BIOS! After that I installed W2K successfully without even adding special drivers. I did not use Navigator CD.

Thank you very much for your answers!