topic heat load data? in Netservers

heat load data?

Bill Robertson_1 — Wed, 20 Jun 2001 15:05:31 GMT

Is there heat load data for the lt6000r series.
It's not on the spec sheet.
Thanks

Re: heat load data?

Bill McNAMARA_1 — Fri, 22 Jun 2001 09:34:07 GMT

You can find it here:
http://netserver.hp.com/products/info.asp?pid=lt6000r&sheet=specs&pid2=lt+6000r

operating temperature (non-metric) 41 to 95 degrees F

operating temperature (metric) 5 to 35 degrees C

operating humidity 20% to 80% noncondensing

Later,
Bill

Re: heat load data?

Bill Robertson_1 — Fri, 22 Jun 2001 18:58:23 GMT

The specifications give it's environmental parameters.
I'm looking for the btu heat generation data.
For the LT6000r there is not a site prep guide.
The installation manual has an entry that says BTU data not available. I was hoping that it was now.

Thanks.

Re: heat load data?

Denver Osborn — Sat, 23 Jun 2001 02:48:27 GMT

I've looked around for this information and haven't found it either.

Sales might have an idea.
1-800-752-0900, choose option 2 then 3 to speak to a sales rep.

Re: heat load data?

Edward Winter — Mon, 25 Jun 2001 13:27:42 GMT

If you download Rack Assistant from http://netserver.hp.com/tools/ you can get the physical dimensions, weight, power requirements and BTU ratings for all hp NetServers.

Re: heat load data?

Bill Robertson_1 — Mon, 25 Jun 2001 19:52:59 GMT

Thanks, I was able to get the BTU data for a configured rack. Rather round-about.
I had actually tried to download Rack assistant a few times before, but wasn't able to.