https://community.hpe.com/t5/netservers/lh-plus-beep-codes/m-p/2588785#M406 Hi, <BR />the 1-3-4-1 beep code means: Test 64K base address lines I/o port 80H: 2c. Probably your server has a memory module failed, so check and replace that module, if not, you have to contact the netserver support to replace processor board.<BR /> Wed, 03 Oct 2001 06:42:57 GMT Frax 2001-10-03T06:42:57Z https://community.hpe.com/t5/netservers/lh-plus-beep-codes/m-p/2588784#M405 I receive some beep codes that I can't find in the documentation. When I turn on my lh plus I hear 1 beep then 3 beeps then 4 beeps then 1 beep. Can someone tell me what this means?<BR /><BR />Thank you,<BR /><BR />Bob Wed, 03 Oct 2001 03:13:40 GMT https://community.hpe.com/t5/netservers/lh-plus-beep-codes/m-p/2588784#M405 Robert Salisbury 2001-10-03T03:13:40Z https://community.hpe.com/t5/netservers/lh-plus-beep-codes/m-p/2588785#M406 Hi, <BR />the 1-3-4-1 beep code means: Test 64K base address lines I/o port 80H: 2c. Probably your server has a memory module failed, so check and replace that module, if not, you have to contact the netserver support to replace processor board.<BR /> Wed, 03 Oct 2001 06:42:57 GMT https://community.hpe.com/t5/netservers/lh-plus-beep-codes/m-p/2588785#M406 Frax 2001-10-03T06:42:57Z https://community.hpe.com/t5/netservers/lh-plus-beep-codes/m-p/2588786#M407 hy<BR />here you can found the meaning of beep code and wath you need to check/replace.<BR /><BR /><A href="http://netserver.hp.com/support/parts_service/beep_codes/beep_codes_tpl.asp?pid=LHPlus" target="_blank">http://netserver.hp.com/support/parts_service/beep_codes/beep_codes_tpl.asp?pid=LHPlus</A><BR /><BR />bye Wed, 03 Oct 2001 19:52:55 GMT https://community.hpe.com/t5/netservers/lh-plus-beep-codes/m-p/2588786#M407 Marino Meloni_1 2001-10-03T19:52:55Z