hpserver-core installation failed

Arturo Acevedo — Wed, 29 Jan 2003 17:42:49 GMT

Hi, I have got the following error when installing the hpserver-core. I would really appreciate if somebody provide some guidance.

rpm -U hpserver-core-5.53.00-01_rh72.i386.rpm
Starting HP Netserver Identification collector: [ OK ]
Loading HP MMC device module: /lib/modules/2.4.7-10smp/kernel/drivers/char/mmc/era/shared/driver/linux/mmcdev.o: init_module: Device or resource busy
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters
[FAILED]
Starting HP IPMI daemon: [ OK ]
Loading HP SEL device driver: /lib/modules/2.4.7-10smp/kernel/drivers/char/mmc/era/shared/seldev/linux/seldev.o: unresolved symbol mmcdev_close
/lib/modules/2.4.7-10smp/kernel/drivers/char/mmc/era/shared/seldev/linux/seldev.o: unresolved symbol mmcdev_open
/lib/modules/2.4.7-10smp/kernel/drivers/char/mmc/era/shared/seldev/linux/seldev.o: unresolved symbol MMCDRVR_SendRcvMessage
/lib/modules/2.4.7-10smp/kernel/drivers/char/mmc/era/shared/seldev/linux/seldev.o: unresolved symbol mmcdev_getmajor
[FAILED]

Re: hpserver-core installation failed

Greg Carlson — Thu, 06 Feb 2003 00:38:10 GMT

Arturo,

What server and what NOS are you installing these on?

Also I see a message w/ failed on MMCdev--> Have you tried to clear CMOS and flash the bios of the server? Do you have any errors on POST like 0080/0090 w/ mmc failures?

That is where I would start. Otherwise give us a little more info please!

Ciao,
Greg

topic Re: hpserver-core installation failed in Netservers

hpserver-core installation failed

Re: hpserver-core installation failed