https://community.hpe.com/t5/netservers/boot-order/m-p/2904791#M4312 Found the answer by going into the configuration utility F2, and changing the boot order there Fri, 14 Feb 2003 17:23:25 GMT Ivan Stretten 2003-02-14T17:23:25Z https://community.hpe.com/t5/netservers/boot-order/m-p/2904790#M4311 I have an E800 with 2 disks on a Netraid controller ID's of 7, and a dat drive on the SCSI a channel with an ID of 3, I want to repvae that dat drive with a scsi hard disk with and ID of 3,When I rebbot the server I get" OPERATING SYSTEM NOT FOUND" How do I change the boot order so that it does not try to boot off the hard disk on the SCSI A channel, I want it to boot off the disks on the Netraid controller, as it normally did with the dat drive in place. Fri, 14 Feb 2003 11:13:07 GMT https://community.hpe.com/t5/netservers/boot-order/m-p/2904790#M4311 Ivan Stretten 2003-02-14T11:13:07Z https://community.hpe.com/t5/netservers/boot-order/m-p/2904791#M4312 Found the answer by going into the configuration utility F2, and changing the boot order there Fri, 14 Feb 2003 17:23:25 GMT https://community.hpe.com/t5/netservers/boot-order/m-p/2904791#M4312 Ivan Stretten 2003-02-14T17:23:25Z