https://community.hpe.com/t5/netservers/lh-pro-help/m-p/2943582#M4579 I am getting the following error message on my L/H Pro Error Code 1C1C. Also the machine will crash occaisonally and the screen will come up hardware failure contact hardware administrator. <BR /><BR />Any help would be appreciated<BR /><BR />Thanks Thu, 03 Apr 2003 23:13:49 GMT Robert_162 2003-04-03T23:13:49Z https://community.hpe.com/t5/netservers/lh-pro-help/m-p/2943582#M4579 I am getting the following error message on my L/H Pro Error Code 1C1C. Also the machine will crash occaisonally and the screen will come up hardware failure contact hardware administrator. <BR /><BR />Any help would be appreciated<BR /><BR />Thanks Thu, 03 Apr 2003 23:13:49 GMT https://community.hpe.com/t5/netservers/lh-pro-help/m-p/2943582#M4579 Robert_162 2003-04-03T23:13:49Z https://community.hpe.com/t5/netservers/lh-pro-help/m-p/2943583#M4580 the problem maybe in your memory. Fri, 04 Apr 2003 05:24:12 GMT https://community.hpe.com/t5/netservers/lh-pro-help/m-p/2943583#M4580 Jordan Zhu 2003-04-04T05:24:12Z https://community.hpe.com/t5/netservers/lh-pro-help/m-p/2943584#M4581 Robert,<BR /><BR />Error 1C1C means that the POST detected a different amount of memory than what is configured in NVRAM. Either you added memory, removed some, or some went bad. Run the ECU, either from floppy or from the Navigator CD, to update the NVRAM.<BR /><BR />Regards,<BR /><BR />Dave Fri, 04 Apr 2003 13:23:39 GMT https://community.hpe.com/t5/netservers/lh-pro-help/m-p/2943584#M4581 Dave Unverhau_1 2003-04-04T13:23:39Z