https://community.hpe.com/t5/netservers/help-lc2000-problem/m-p/2986333#M4808 Hi,<BR /><BR />To see the drives in DOS you don't need the DOS driver if you have the controller set to being the 1st bootable one. Then it's using the int13 so you can connect to it without a DOS driver.<BR /><BR />Just in case you still need the DOS driver I attached my working version.<BR /><BR />Just let me know if this still not working or you would like to something completely different.<BR /><BR />Best regards, jeroen<BR /> Wed, 04 Jun 2003 05:48:32 GMT Jeroen_Kleen 2003-06-04T05:48:32Z https://community.hpe.com/t5/netservers/help-lc2000-problem/m-p/2986332#M4807 Can anybody advise me to load SCSI (Symbios) drivers to initialize disk drives in order to load in DOS mode.<BR />The drivers taken from Navigator CD is not working properly. Mon, 02 Jun 2003 10:39:27 GMT https://community.hpe.com/t5/netservers/help-lc2000-problem/m-p/2986332#M4807 kokila 2003-06-02T10:39:27Z https://community.hpe.com/t5/netservers/help-lc2000-problem/m-p/2986333#M4808 Hi,<BR /><BR />To see the drives in DOS you don't need the DOS driver if you have the controller set to being the 1st bootable one. Then it's using the int13 so you can connect to it without a DOS driver.<BR /><BR />Just in case you still need the DOS driver I attached my working version.<BR /><BR />Just let me know if this still not working or you would like to something completely different.<BR /><BR />Best regards, jeroen<BR /> Wed, 04 Jun 2003 05:48:32 GMT https://community.hpe.com/t5/netservers/help-lc2000-problem/m-p/2986333#M4808 Jeroen_Kleen 2003-06-04T05:48:32Z