https://community.hpe.com/t5/netservers/lc-2000-processor-upgrade/m-p/2993893#M4853 Check out the following document:<BR /><BR /><A href="http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=tis04860" target="_blank">http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=tis04860</A><BR /><BR />It says that the switches for the LC2000 need to be set to:<BR />1. OFF<BR />2. ON<BR />3. ON<BR />4. ON<BR /><BR />Alicia Wed, 11 Jun 2003 05:00:20 GMT Alicia White 2003-06-11T05:00:20Z https://community.hpe.com/t5/netservers/lc-2000-processor-upgrade/m-p/2993892#M4852 I have a 667 CPU and I want to replace with 2 800MHZ CPU's. I can find the jumpers settings for the motherboard for 866 and up and the 733 and lower, but not for the 800MHZ CPU. Does anyone know what the switches should be set to? Thanks Tue, 10 Jun 2003 22:00:21 GMT https://community.hpe.com/t5/netservers/lc-2000-processor-upgrade/m-p/2993892#M4852 Chris Craven 2003-06-10T22:00:21Z https://community.hpe.com/t5/netservers/lc-2000-processor-upgrade/m-p/2993893#M4853 Check out the following document:<BR /><BR /><A href="http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=tis04860" target="_blank">http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=tis04860</A><BR /><BR />It says that the switches for the LC2000 need to be set to:<BR />1. OFF<BR />2. ON<BR />3. ON<BR />4. ON<BR /><BR />Alicia Wed, 11 Jun 2003 05:00:20 GMT https://community.hpe.com/t5/netservers/lc-2000-processor-upgrade/m-p/2993893#M4853 Alicia White 2003-06-11T05:00:20Z