https://community.hpe.com/t5/netservers/netserver-lc-plus/m-p/2995942#M4873 By an error I have upgraded lc plus server using bios diskette of lc server. Now, the information I can see is Pentium 100Mhz instead Pentium 166MHz. I have downloaded the bios upgrade for this model but the HPUpdate utility failed because "it cannot find all the required EPROM components". I either cannot use the EISA utility tool for this model because the system is asking for the CFG files of the LC one. Is there an option to force the bios upgrade? Is there any other solution? Thu, 12 Jun 2003 13:50:46 GMT Victor Umansky 2003-06-12T13:50:46Z https://community.hpe.com/t5/netservers/netserver-lc-plus/m-p/2995942#M4873 By an error I have upgraded lc plus server using bios diskette of lc server. Now, the information I can see is Pentium 100Mhz instead Pentium 166MHz. I have downloaded the bios upgrade for this model but the HPUpdate utility failed because "it cannot find all the required EPROM components". I either cannot use the EISA utility tool for this model because the system is asking for the CFG files of the LC one. Is there an option to force the bios upgrade? Is there any other solution? Thu, 12 Jun 2003 13:50:46 GMT https://community.hpe.com/t5/netservers/netserver-lc-plus/m-p/2995942#M4873 Victor Umansky 2003-06-12T13:50:46Z https://community.hpe.com/t5/netservers/netserver-lc-plus/m-p/2995943#M4874 Victor,<BR /><BR />Try to edit the autoexec.bat file on the BIOS update diskette.<BR />You will see the command @hpupdate -p<BR /><BR />Change it to @hpudate -p -o -b<BR /><BR />You should now be able to flash the BIOS to the correct version.<BR /><BR />Good luck,<BR /><BR />Marco Tue, 17 Jun 2003 05:54:59 GMT https://community.hpe.com/t5/netservers/netserver-lc-plus/m-p/2995943#M4874 Marco Hogeveen 2003-06-17T05:54:59Z