https://community.hpe.com/t5/netservers/lc2000-beep-code-error/m-p/3004126#M4933 Hmmm, very interesting. I didn't see that particular code on the beep code list for the LC2000. You can see the list here:<BR /><A href="http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=lpn10715&amp;locale=en_US" target="_blank">http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=lpn10715&amp;locale=en_US</A><BR /><BR />But, I did find that 1-4-3-3 beep code for the LXr 8500 and several other, older NetServers. See the Beep Code list for the LXr 8500 here:<BR /><A href="http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=tis11396&amp;locale=en_US" target="_blank">http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=tis11396&amp;locale=en_US</A><BR /><BR />On the LXr 8500 and several other NetServers, that particular beep code indicates a problem with "Autosize cache." The recommended solution is to check and replace CPU, then check and replace system board. Before doing any of that, I would make sure system BIOS is up-to-date.<BR /><BR />But, I don't know if the same beep code error would apply to the LC2000. But, I would certainly update the BIOS on the system board to be sure. It could be the BIOS revision on your system board doesn't support the CPU stepping of the new CPU you added.<BR /><BR />You can download the latest BIOS here:<BR /><A href="http://h20004.www2.hp.com/soar_rnotes/bsdmatrix/matrix62572en_US.html" target="_blank">http://h20004.www2.hp.com/soar_rnotes/bsdmatrix/matrix62572en_US.html</A><BR /><BR />Which BIOS revision do you have? The latest appears to be 4.06.30 PV for Ultra2 SCSI systems and 4.06.04 RM for U3 systems.<BR /><BR />Alicia Mon, 23 Jun 2003 05:26:31 GMT Alicia White 2003-06-23T05:26:31Z https://community.hpe.com/t5/netservers/lc2000-beep-code-error/m-p/3004122#M4929 I am trying to add a second cpu to my server. However, the CPU I got give a beep code when it is installed. I have tried looking for it on the HP website, but no luck. It is 1-4-3-3. I think it's a bad CPU, but I want to be sure. Thanks for the help.<BR /><BR />Brendon Sun, 22 Jun 2003 01:16:55 GMT https://community.hpe.com/t5/netservers/lc2000-beep-code-error/m-p/3004122#M4929 Brendon Fung 2003-06-22T01:16:55Z https://community.hpe.com/t5/netservers/lc2000-beep-code-error/m-p/3004123#M4930 Hmmm, very interesting. I didn't see that particular code on the beep code list for the LC2000. You can see the list here:<BR /><A href="http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=lpn10715&amp;locale=en_US" target="_blank">http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=lpn10715&amp;locale=en_US</A><BR /><BR />But, I did find that 1-4-3-3 beep code for the LXr 8500 and several other, older NetServers. See the Beep Code list for the LXr 8500 here:<BR /><A href="http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=tis11396&amp;locale=en_US" target="_blank">http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=tis11396&amp;locale=en_US</A><BR /><BR />On the LXr 8500 and several other NetServers, that particular beep code indicates a problem with "Autosize cache." The recommended solution is to check and replace CPU, then check and replace system board. Before doing any of that, I would make sure system BIOS is up-to-date.<BR /><BR />But, I don't know if the same beep code error would apply to the LC2000. But, I would certainly update the BIOS on the system board to be sure. It could be the BIOS revision on your system board doesn't support the CPU stepping of the new CPU you added.<BR /><BR />You can download the latest BIOS here:<BR /><A href="http://h20004.www2.hp.com/soar_rnotes/bsdmatrix/matrix62572en_US.html" target="_blank">http://h20004.www2.hp.com/soar_rnotes/bsdmatrix/matrix62572en_US.html</A><BR /><BR />Which BIOS revision do you have? The latest appears to be 4.06.30 PV for Ultra2 SCSI systems and 4.06.04 RM for U3 systems.<BR /><BR />Alicia<BR /><BR />Alicia Mon, 23 Jun 2003 05:26:04 GMT https://community.hpe.com/t5/netservers/lc2000-beep-code-error/m-p/3004123#M4930 Alicia White 2003-06-23T05:26:04Z https://community.hpe.com/t5/netservers/lc2000-beep-code-error/m-p/3004124#M4931 Hmmm, very interesting. I didn't see that particular code on the beep code list for the LC2000. You can see the list here:<BR /><A href="http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=lpn10715&amp;locale=en_US" target="_blank">http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=lpn10715&amp;locale=en_US</A><BR /><BR />But, I did find that 1-4-3-3 beep code for the LXr 8500 and several other, older NetServers. See the Beep Code list for the LXr 8500 here:<BR /><A href="http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=tis11396&amp;locale=en_US" target="_blank">http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=tis11396&amp;locale=en_US</A><BR /><BR />On the LXr 8500 and several other NetServers, that particular beep code indicates a problem with "Autosize cache." The recommended solution is to check and replace CPU, then check and replace system board. Before doing any of that, I would make sure system BIOS is up-to-date.<BR /><BR />But, I don't know if the same beep code error would apply to the LC2000. But, I would certainly update the BIOS on the system board to be sure. It could be the BIOS revision on your system board doesn't support the CPU stepping of the new CPU you added.<BR /><BR />You can download the latest BIOS here:<BR /><A href="http://h20004.www2.hp.com/soar_rnotes/bsdmatrix/matrix62572en_US.html" target="_blank">http://h20004.www2.hp.com/soar_rnotes/bsdmatrix/matrix62572en_US.html</A><BR /><BR />Which BIOS revision do you have? The latest appears to be 4.06.30 PV for Ultra2 SCSI systems and 4.06.04 RM for U3 systems.<BR /><BR />Alicia Mon, 23 Jun 2003 05:26:12 GMT https://community.hpe.com/t5/netservers/lc2000-beep-code-error/m-p/3004124#M4931 Alicia White 2003-06-23T05:26:12Z https://community.hpe.com/t5/netservers/lc2000-beep-code-error/m-p/3004125#M4932 Hmmm, very interesting. I didn't see that particular code on the beep code list for the LC2000. You can see the list here:<BR /><A href="http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=lpn10715&amp;locale=en_US" target="_blank">http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=lpn10715&amp;locale=en_US</A><BR /><BR />But, I did find that 1-4-3-3 beep code for the LXr 8500 and several other, older NetServers. See the Beep Code list for the LXr 8500 here:<BR /><A href="http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=tis11396&amp;locale=en_US" target="_blank">http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=tis11396&amp;locale=en_US</A><BR /><BR />On the LXr 8500 and several other NetServers, that particular beep code indicates a problem with "Autosize cache." The recommended solution is to check and replace CPU, then check and replace system board. Before doing any of that, I would make sure system BIOS is up-to-date.<BR /><BR />But, I don't know if the same beep code error would apply to the LC2000. But, I would certainly update the BIOS on the system board to be sure. It could be the BIOS revision on your system board doesn't support the CPU stepping of the new CPU you added.<BR /><BR />You can download the latest BIOS here:<BR /><A href="http://h20004.www2.hp.com/soar_rnotes/bsdmatrix/matrix62572en_US.html" target="_blank">http://h20004.www2.hp.com/soar_rnotes/bsdmatrix/matrix62572en_US.html</A><BR /><BR />Which BIOS revision do you have? The latest appears to be 4.06.30 PV for Ultra2 SCSI systems and 4.06.04 RM for U3 systems.<BR /><BR />Alicia Mon, 23 Jun 2003 05:26:23 GMT https://community.hpe.com/t5/netservers/lc2000-beep-code-error/m-p/3004125#M4932 Alicia White 2003-06-23T05:26:23Z https://community.hpe.com/t5/netservers/lc2000-beep-code-error/m-p/3004126#M4933 Hmmm, very interesting. I didn't see that particular code on the beep code list for the LC2000. You can see the list here:<BR /><A href="http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=lpn10715&amp;locale=en_US" target="_blank">http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=lpn10715&amp;locale=en_US</A><BR /><BR />But, I did find that 1-4-3-3 beep code for the LXr 8500 and several other, older NetServers. See the Beep Code list for the LXr 8500 here:<BR /><A href="http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=tis11396&amp;locale=en_US" target="_blank">http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=tis11396&amp;locale=en_US</A><BR /><BR />On the LXr 8500 and several other NetServers, that particular beep code indicates a problem with "Autosize cache." The recommended solution is to check and replace CPU, then check and replace system board. Before doing any of that, I would make sure system BIOS is up-to-date.<BR /><BR />But, I don't know if the same beep code error would apply to the LC2000. But, I would certainly update the BIOS on the system board to be sure. It could be the BIOS revision on your system board doesn't support the CPU stepping of the new CPU you added.<BR /><BR />You can download the latest BIOS here:<BR /><A href="http://h20004.www2.hp.com/soar_rnotes/bsdmatrix/matrix62572en_US.html" target="_blank">http://h20004.www2.hp.com/soar_rnotes/bsdmatrix/matrix62572en_US.html</A><BR /><BR />Which BIOS revision do you have? The latest appears to be 4.06.30 PV for Ultra2 SCSI systems and 4.06.04 RM for U3 systems.<BR /><BR />Alicia Mon, 23 Jun 2003 05:26:31 GMT https://community.hpe.com/t5/netservers/lc2000-beep-code-error/m-p/3004126#M4933 Alicia White 2003-06-23T05:26:31Z https://community.hpe.com/t5/netservers/lc2000-beep-code-error/m-p/3004127#M4934 Alicia,<BR /><BR />Thanks for the info. I am running 4.06.30 PV already however. I flashed it before installing the second CPU.<BR /><BR /> Mon, 23 Jun 2003 19:42:29 GMT https://community.hpe.com/t5/netservers/lc2000-beep-code-error/m-p/3004127#M4934 Brendon Fung 2003-06-23T19:42:29Z