https://community.hpe.com/t5/netservers/enter-the-netserver-lh-pro-bios/m-p/3005900#M4940 Hello,<BR />I recovered a Hp Netserver Lh Pro but i don't know how to enter the bios.<BR />Must I push a specific key on the keyboard at the startup ?<BR />The server can't boot on a floppy disk or a Cd-rom.<BR /><BR />Please Help Tue, 24 Jun 2003 13:50:49 GMT Leroux_2 2003-06-24T13:50:49Z https://community.hpe.com/t5/netservers/enter-the-netserver-lh-pro-bios/m-p/3005900#M4940 Hello,<BR />I recovered a Hp Netserver Lh Pro but i don't know how to enter the bios.<BR />Must I push a specific key on the keyboard at the startup ?<BR />The server can't boot on a floppy disk or a Cd-rom.<BR /><BR />Please Help Tue, 24 Jun 2003 13:50:49 GMT https://community.hpe.com/t5/netservers/enter-the-netserver-lh-pro-bios/m-p/3005900#M4940 Leroux_2 2003-06-24T13:50:49Z https://community.hpe.com/t5/netservers/enter-the-netserver-lh-pro-bios/m-p/3005901#M4941 To access the Bios/ECU you need the ECU (Eisa Config Utility) diskette. You can create one here. <A href="http://h20004.www2.hp.com/soar_rnotes/bsdmatrix/matrix50454en_US.html" target="_blank">http://h20004.www2.hp.com/soar_rnotes/bsdmatrix/matrix50454en_US.html</A><BR /><BR />Why can't you boot the floppy? Default boot should be cd, floppy, hdd. If you don't have defaults set up, then with power off, turn switch 3 config valid to the off position. Then power on until the config is clear. Then you will be able to boot to floppy and save your config.<BR /><BR />Ciao,<BR />Greg Tue, 24 Jun 2003 20:49:21 GMT https://community.hpe.com/t5/netservers/enter-the-netserver-lh-pro-bios/m-p/3005901#M4941 Greg Carlson 2003-06-24T20:49:21Z https://community.hpe.com/t5/netservers/enter-the-netserver-lh-pro-bios/m-p/3005902#M4942 You have to use a Floppy or CD-Rom to acess teh BIOS utility. It can be downloaded from HP's website. Tue, 01 Jul 2003 17:07:43 GMT https://community.hpe.com/t5/netservers/enter-the-netserver-lh-pro-bios/m-p/3005902#M4942 Gordon Owens 2003-07-01T17:07:43Z