topic LH3 hardware log in Netservers https://community.hpe.com/t5/netservers/lh3-hardware-log/m-p/3021727#M5028 Hello<BR /><BR />I hope this isn't a duplicate message, but I'm not sure my previous message went through.<BR />I have a NetServer LH3 with a RAID 5 set.<BR />The server is working fine, with no visible alarms, but Toptools shows a critical alarm for all four drives in the array. Checking the status of each drive returns a 'no significant events reported against this device' message.<BR />I cleared the hardware event log, but the condition remains.<BR />I'm running the latest version of Toptools.<BR />These are my questions:<BR />- What does the alarm mean?<BR />- Can I acknowledge any alarm without flushing the log?<BR />- Why does the alarm remain even after clearing the log?<BR />- Is there a way to acknowledge alarms/clear the log using only the front panel?<BR /><BR />Your help would be much appreciated.<BR /><BR /> Denis<BR /><BR />These are my questions Fri, 11 Jul 2003 17:48:12 GMT Denis_25 2003-07-11T17:48:12Z LH3 hardware log https://community.hpe.com/t5/netservers/lh3-hardware-log/m-p/3021727#M5028 Hello<BR /><BR />I hope this isn't a duplicate message, but I'm not sure my previous message went through.<BR />I have a NetServer LH3 with a RAID 5 set.<BR />The server is working fine, with no visible alarms, but Toptools shows a critical alarm for all four drives in the array. Checking the status of each drive returns a 'no significant events reported against this device' message.<BR />I cleared the hardware event log, but the condition remains.<BR />I'm running the latest version of Toptools.<BR />These are my questions:<BR />- What does the alarm mean?<BR />- Can I acknowledge any alarm without flushing the log?<BR />- Why does the alarm remain even after clearing the log?<BR />- Is there a way to acknowledge alarms/clear the log using only the front panel?<BR /><BR />Your help would be much appreciated.<BR /><BR /> Denis<BR /><BR />These are my questions Fri, 11 Jul 2003 17:48:12 GMT https://community.hpe.com/t5/netservers/lh3-hardware-log/m-p/3021727#M5028 Denis_25 2003-07-11T17:48:12Z