https://community.hpe.com/t5/netservers/netraid-alarmed/m-p/3051181#M5216 As well as what Martin said, when you go in to the NetRaid with CTRL+M there is an option to turn off the alarm. It is nearly at the bottom of the first screen<BR />cheers<BR />Malvin<BR /> Tue, 19 Aug 2003 06:54:01 GMT malvin drakley 2003-08-19T06:54:01Z https://community.hpe.com/t5/netservers/netraid-alarmed/m-p/3051179#M5214 Hi!<BR />I have a LH6000 netserver with a netraid 3si controller that is alarmed, the question is, how could i know what the problem is? I've downloaded and installed the newest bios and firmware but the problem persists. The information i have on the array is critical. <BR />Thanks!<BR /> Mon, 18 Aug 2003 16:55:08 GMT https://community.hpe.com/t5/netservers/netraid-alarmed/m-p/3051179#M5214 Jerónimo Jacobo Torres 2003-08-18T16:55:08Z https://community.hpe.com/t5/netservers/netraid-alarmed/m-p/3051180#M5215 Run NetRAID assistant or the NetRAID Express tool (reboot system and press CTRL-M when prompted), then check physical drives. Seems one is failed.<BR /><BR />BTW the drive led should be blinking red. Mon, 18 Aug 2003 18:43:46 GMT https://community.hpe.com/t5/netservers/netraid-alarmed/m-p/3051180#M5215 Martin Breidenbach 2003-08-18T18:43:46Z https://community.hpe.com/t5/netservers/netraid-alarmed/m-p/3051181#M5216 As well as what Martin said, when you go in to the NetRaid with CTRL+M there is an option to turn off the alarm. It is nearly at the bottom of the first screen<BR />cheers<BR />Malvin<BR /> Tue, 19 Aug 2003 06:54:01 GMT https://community.hpe.com/t5/netservers/netraid-alarmed/m-p/3051181#M5216 malvin drakley 2003-08-19T06:54:01Z