https://community.hpe.com/t5/netservers/again-problems-with-some-hardware-and-win2k/m-p/3060884#M5300 Yes its the same netserver lh pro. I tried some slots but it keeps saying error code 10 (the device is not working are not in the system) Also, what is the name for the pci to pci bridge driver? is there a dec driver in the system devices? i saw a dec chip on the motherboard, it looks like all of my pci slots are not usable. But the ecu program recognize the cards in the slots! It sees the network card and second videocard. Only windows 2000 (server) doesn't see them. It's a very weird problem.<BR /><BR />thx for your reply. Wed, 03 Sep 2003 06:56:12 GMT Evert_2 2003-09-03T06:56:12Z https://community.hpe.com/t5/netservers/again-problems-with-some-hardware-and-win2k/m-p/3060882#M5298 I try to install a intel82557 10/100 pci card, but its keep saying error code 10, device not working or find, also when i place a second videocard in a pci slot, windows gives while booting a bluescreen saying it cant initialize the video... it looks like my whole pci bridge is not working, also tried different slots...<BR /><BR />i also cant change irq settings in win2k, i tried to change the irq settings for the network nic, but the window sources is not available in the properties. Mon, 01 Sep 2003 19:10:21 GMT https://community.hpe.com/t5/netservers/again-problems-with-some-hardware-and-win2k/m-p/3060882#M5298 Evert_2 2003-09-01T19:10:21Z https://community.hpe.com/t5/netservers/again-problems-with-some-hardware-and-win2k/m-p/3060883#M5299 Is this the LH Pro from the other forum message ?<BR /><BR />If yes then maybe plugging cards in other slots may help. <BR /><BR />Slot 9 - primary PCI bus<BR />Slot 8 - secondary PCI bus, shares IRQ with onboard adaptec SCSI controllers<BR />Slot 7 - secondary PCI bus, shares IRQ with slot 5<BR />Slot 6 - secondary PCI bus<BR />Slot 5 - secondary PCI bus, shares IRQ with slot 7<BR /><BR />The best slot for a 'high performance card' like array controller is slot 9.<BR /><BR />Put 'similar cards' in slot 5 and 7. For example if you want to add two network cards then usually its no problem if they are the same model and share an interrupt.<BR /><BR />Try to avoid using slot 8. Tue, 02 Sep 2003 09:48:47 GMT https://community.hpe.com/t5/netservers/again-problems-with-some-hardware-and-win2k/m-p/3060883#M5299 Martin Breidenbach 2003-09-02T09:48:47Z https://community.hpe.com/t5/netservers/again-problems-with-some-hardware-and-win2k/m-p/3060884#M5300 Yes its the same netserver lh pro. I tried some slots but it keeps saying error code 10 (the device is not working are not in the system) Also, what is the name for the pci to pci bridge driver? is there a dec driver in the system devices? i saw a dec chip on the motherboard, it looks like all of my pci slots are not usable. But the ecu program recognize the cards in the slots! It sees the network card and second videocard. Only windows 2000 (server) doesn't see them. It's a very weird problem.<BR /><BR />thx for your reply. Wed, 03 Sep 2003 06:56:12 GMT https://community.hpe.com/t5/netservers/again-problems-with-some-hardware-and-win2k/m-p/3060884#M5300 Evert_2 2003-09-03T06:56:12Z https://community.hpe.com/t5/netservers/again-problems-with-some-hardware-and-win2k/m-p/3060885#M5301 I don't know what's wrong. I've installed Netware and NT4 on several LH Pro but never tried Win2K.<BR /><BR />I'd try to install Win2K without any other cards first. Then add one card at a time.<BR /><BR /> Wed, 03 Sep 2003 14:20:54 GMT https://community.hpe.com/t5/netservers/again-problems-with-some-hardware-and-win2k/m-p/3060885#M5301 Martin Breidenbach 2003-09-03T14:20:54Z