https://community.hpe.com/t5/netservers/bios-boot-error/m-p/3083211#M5490 &lt;&lt; "Unresolved config mismatch between disk(s) and NVRAM." &gt;&gt;<BR /><BR />This is a NetRAID controller error message. NetRAID configuration is stored in controller cmos and on the hard drives. If these two differ you get that message.<BR /><BR />During POST press CTRL-M when prompted, select 'view/add configuration'. You should get a menu where it asks whether it should read configuration from nvram or from disk. Select the 'correct one'. Verify that its ok, exit and reboot.<BR /> Thu, 02 Oct 2003 02:46:12 GMT Martin Breidenbach 2003-10-02T02:46:12Z https://community.hpe.com/t5/netservers/bios-boot-error/m-p/3083210#M5489 We have an HP 60004 netserver that has an error in the BIOS that will not let the system boot until we "press key to continue". The error is: "Unresolved config mismatch between disk(s) and NVRAM." <BR />Does anyone know what we can we do to fix this? Wed, 01 Oct 2003 15:40:38 GMT https://community.hpe.com/t5/netservers/bios-boot-error/m-p/3083210#M5489 Scott Conaway 2003-10-01T15:40:38Z https://community.hpe.com/t5/netservers/bios-boot-error/m-p/3083211#M5490 &lt;&lt; "Unresolved config mismatch between disk(s) and NVRAM." &gt;&gt;<BR /><BR />This is a NetRAID controller error message. NetRAID configuration is stored in controller cmos and on the hard drives. If these two differ you get that message.<BR /><BR />During POST press CTRL-M when prompted, select 'view/add configuration'. You should get a menu where it asks whether it should read configuration from nvram or from disk. Select the 'correct one'. Verify that its ok, exit and reboot.<BR /> Thu, 02 Oct 2003 02:46:12 GMT https://community.hpe.com/t5/netservers/bios-boot-error/m-p/3083211#M5490 Martin Breidenbach 2003-10-02T02:46:12Z