https://community.hpe.com/t5/netservers/netserver-tc-4100-nic/m-p/3085530#M5503 I have a problem with the integrated NIC. I' m only getting a 10 Mbit connection. My network infrastructure suports 100 Mbit. With a separate Intel pro 10/100 there are no problems with the network speed. The installed driver for the network-interface is the newest one from the hp website. If I switch the connection speed at from 10 Mbit/full duplex to 100 Mbit/half or full duplex, connection is lost. I get an error message that the network cable is disconnected. Sat, 04 Oct 2003 09:18:47 GMT Thomas Heyne 2003-10-04T09:18:47Z https://community.hpe.com/t5/netservers/netserver-tc-4100-nic/m-p/3085530#M5503 I have a problem with the integrated NIC. I' m only getting a 10 Mbit connection. My network infrastructure suports 100 Mbit. With a separate Intel pro 10/100 there are no problems with the network speed. The installed driver for the network-interface is the newest one from the hp website. If I switch the connection speed at from 10 Mbit/full duplex to 100 Mbit/half or full duplex, connection is lost. I get an error message that the network cable is disconnected. Sat, 04 Oct 2003 09:18:47 GMT https://community.hpe.com/t5/netservers/netserver-tc-4100-nic/m-p/3085530#M5503 Thomas Heyne 2003-10-04T09:18:47Z https://community.hpe.com/t5/netservers/netserver-tc-4100-nic/m-p/3085531#M5504 What is the actual driver installed for the tc4100 integrated NIC?<BR /><BR />What operating system are you running?<BR /><BR />You may also want to run the HP diagnostics on this server &amp; see if any problems are reported. DiagTools for the tc4100 is located here:<BR /><BR /><A href="http://h20004.www2.hp.com/soar_rnotes/bsdmatrix/matrix78192en_US.html#Diagnostic" target="_blank">http://h20004.www2.hp.com/soar_rnotes/bsdmatrix/matrix78192en_US.html#Diagnostic</A> Mon, 06 Oct 2003 13:06:08 GMT https://community.hpe.com/t5/netservers/netserver-tc-4100-nic/m-p/3085531#M5504 Terri Harris 2003-10-06T13:06:08Z