https://community.hpe.com/t5/netservers/netserver-lh3000r-disk-array/m-p/3096228#M5582 install the HP Netraid Utility/Monitor for LH3000r <BR /><A href="http://h20004.www2.hp.com/soar_rnotes/bsdmatrix/matrix50449en_US.html" target="_blank">http://h20004.www2.hp.com/soar_rnotes/bsdmatrix/matrix50449en_US.html</A><BR /><BR />Run this program, and see if you have any configured arrays or just ready drives.<BR /><BR /><BR />Otherwise, reboot the server, CTRL+M when prompted by the Netraid Express Tools,<BR />select the adapter, select objects--&gt;logical drives, to see if there are any. Fri, 17 Oct 2003 23:28:21 GMT Sachin_16 2003-10-17T23:28:21Z https://community.hpe.com/t5/netservers/netserver-lh3000r-disk-array/m-p/3096227#M5581 I've inherited the maintenance responsibility for a Netserver LH3000r, P3-600 with four 9.10GB SCSI Ultra-2 Hot Swap drives. I know that it was recently updated from NT4 to Win2K. I'm not familiar with HP NetRaid. I understand that this model has an integrated controller. How can I check to see if an array was ever configured? Fri, 17 Oct 2003 11:13:08 GMT https://community.hpe.com/t5/netservers/netserver-lh3000r-disk-array/m-p/3096227#M5581 Denise_24 2003-10-17T11:13:08Z https://community.hpe.com/t5/netservers/netserver-lh3000r-disk-array/m-p/3096228#M5582 install the HP Netraid Utility/Monitor for LH3000r <BR /><A href="http://h20004.www2.hp.com/soar_rnotes/bsdmatrix/matrix50449en_US.html" target="_blank">http://h20004.www2.hp.com/soar_rnotes/bsdmatrix/matrix50449en_US.html</A><BR /><BR />Run this program, and see if you have any configured arrays or just ready drives.<BR /><BR /><BR />Otherwise, reboot the server, CTRL+M when prompted by the Netraid Express Tools,<BR />select the adapter, select objects--&gt;logical drives, to see if there are any. Fri, 17 Oct 2003 23:28:21 GMT https://community.hpe.com/t5/netservers/netserver-lh3000r-disk-array/m-p/3096228#M5582 Sachin_16 2003-10-17T23:28:21Z