topic Re: Netserver5/133 in Netservers

Netserver5/133

Joeeyfig — Tue, 30 Oct 2001 17:43:51 GMT

I just got a old Netserver 5/133 looks to be in good condition but i have played with it a little and i can not get it to boot got it to post and it says EISA CONF BAD RUN Configeration uitillity witch i guess is ECU? floppy wont boot how di i get it to? and are there any .doc on this computer on the HP site please help thanks Joe

Re: Netserver5/133

Theo Hill_1 — Tue, 30 Oct 2001 21:18:50 GMT

I am assuming this is an LC server. Here is a link to the system board info. I would move switch 3 to the on position and boot it, then power the system down and move the switch back and then try and boot to the ECU. Remeber the BIOS level and ECU must match, so if the BIOS level is older than the ECU, try flashing the BIOS first. HEre is the link:

http://netserver.hp.com/support/parts_service/system_board/sys_board_tpl.asp?pid=LC

There are other choices for this server in the drop down menu in the upper right corner. If it is not an LC server, let me know what kind it is, and I will find you a link.

Re: Netserver5/133

Joeeyfig — Wed, 31 Oct 2001 09:19:01 GMT

Tried the switch thing NoGO
its like the floppy drive does not work the light never
comes on tried other floppy drives after posts go s to System Error....
and yes it is a LC nice link thanks