topic Re: HP-LC2000 in Netservers

HP-LC2000

Sok — Tue, 10 Feb 2004 10:42:30 GMT

I want to change OS on the HP-LC2000 from WINNT4.0 Server to W2k3 Server. Ist it without Problem or...?
Exist any Documantation about dies akt?
Sincerely

Re: HP-LC2000

Greg Carlson — Tue, 10 Feb 2004 10:56:41 GMT

Sok,

Server 2003 is not tested or supported on any of the retired netserver line. See the NOS support matrix http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=tis00993&locale=en_US&taskId=135&prodSeriesId=50440&prodTypeId=15351

If you need a supported configuration, install Server 2000. Otherwise you can try to run native 2003 drivers, but the results are not guaranteed.

Also it would be recommended to do a fresh install of the new OS instead of performing an upgrade.

Ciao,
Greg

Re: HP-LC2000

amhakassa — Tue, 10 Feb 2004 11:09:35 GMT

Hi Sok,
And here is where you can get the driver for windows 2003
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?pnameOID=62573&locale=en_US&taskId=135&prodSeriesId=62572&prodTypeId=15351&swEnvOID=181

It is also recommendded to update your bios and firmware on controllers (if any red controller) from teh following link

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?pnameOID=62573&locale=en_US&taskId=135&prodSeriesId=62572&prodTypeId=15351&swEnvOID=54

regards
Amha Kassa