https://community.hpe.com/t5/netservers/netraid-4m-replacement/m-p/2607335#M650 hi<BR />yes after replacing the controler netraid-4M, at the first boot he will ask you to accept the config data of the hdd, you accept and you will found the rignht config.<BR />bye<BR />marino Mon, 05 Nov 2001 15:05:13 GMT Marino Meloni_1 2001-11-05T15:05:13Z https://community.hpe.com/t5/netservers/netraid-4m-replacement/m-p/2607334#M649 As part of a troubleshooting process I replace the NetRAID-4M controller, after swapping the controllers what should I do regarding the configuration and restore the old config?<BR />Do the controllers automatically configure itself<BR /> Mon, 05 Nov 2001 13:41:35 GMT https://community.hpe.com/t5/netservers/netraid-4m-replacement/m-p/2607334#M649 C.I.S 2001-11-05T13:41:35Z https://community.hpe.com/t5/netservers/netraid-4m-replacement/m-p/2607335#M650 hi<BR />yes after replacing the controler netraid-4M, at the first boot he will ask you to accept the config data of the hdd, you accept and you will found the rignht config.<BR />bye<BR />marino Mon, 05 Nov 2001 15:05:13 GMT https://community.hpe.com/t5/netservers/netraid-4m-replacement/m-p/2607335#M650 Marino Meloni_1 2001-11-05T15:05:13Z https://community.hpe.com/t5/netservers/netraid-4m-replacement/m-p/2607336#M651 You got 30 seconds, and it will from default read the configuration from the disks. Thu, 08 Nov 2001 09:17:28 GMT https://community.hpe.com/t5/netservers/netraid-4m-replacement/m-p/2607336#M651 Kim Moberg_1 2001-11-08T09:17:28Z