topic Re: Getting Driver_Power_State_Failure when restarting NetServer LC3 Server in Netservers

Getting Driver_Power_State_Failure when restarting NetServer LC3 Server

Dan Hernandez — Thu, 25 Mar 2004 12:42:33 GMT

Upon restarting NetServer LC3 Server, I get a blue screen stating, that there was a Driver_Power_State_Failure. The message recommends disabling the bios memory options such as caching and shadowing. I've done this with the same results.

Upon getting the error, I have to do a cold boot.

I'm running Win2K server with 4.06.38PQ bios

Any ideas?

regards,
Dan

Re: Getting Driver_Power_State_Failure when restarting NetServer LC3 Server

amhakassa — Thu, 25 Mar 2004 13:10:38 GMT

Hi Dan,

This is an Operating system issue as explained in the following microsoft articles.
Article - 239415
Article - 246243
Article - 821285

Therefore, you can look at those articles in Microsoft Knoledge base and pick the once that most probabily explain your issue and act as the article recommend

Regards
Amha Kassa

Re: Getting Driver_Power_State_Failure when restarting NetServer LC3 Server

Dan Hernandez — Thu, 25 Mar 2004 14:14:27 GMT

Thanks, I'll look there.

regards,
Dan