topic Lc 2000 netserver in Netservers

Lc 2000 netserver

Clint Burton_1 — Mon, 17 May 2004 12:53:51 GMT

I currently have a bad hard disk and have ordered a new to replace I will not be doing this till tommrow is there any way to turn off the alarm? it is very loud

HELP

Re: Lc 2000 netserver

amhakassa — Mon, 17 May 2004 13:13:55 GMT

Hi Clint

If server is not in production
go ahead and reboot the server in to CTRL + M (Netraid Express Tools) and
dpenmding on the typ of raid controller u have the Alarm Control will be on the main menu or under adapter
if it is the main menu fine if not go to
Object/Adapter/Alarm control and u can silence it or turn it off.

Hope this helps

regards
Amha Kassa

Re: Lc 2000 netserver

amhakassa — Mon, 17 May 2004 13:19:50 GMT

If Server is in production
1 Go to this link
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?locale=en_US&pnameOID=62573&taskId=135&prodTypeId=15351&prodSeriesId=62572〈=en&cc=us

2. Seklect your Operating System

3. Download netraid assistant (for microsoft OS) or Megamanager (for Netware) for the following link
4. unzip it to a folder and install it in your system by double clicking steup file (which will be found in the folder you have unzipped the files into)

Note :
. During installation choose manage adapter in this server only for now
.You do not need to restart server after installation so you can choose no when you are asked to restart
5. Run Netraid assistant (which will be found under programs after installation)
6. Go to Alarm Control Menu
7. Chose diasble or silence depending on what you want

I hope this will help

Regards
Amha Kassa

Re: Lc 2000 netserver

Terri Harris — Fri, 11 Jun 2004 14:49:05 GMT

Good info on the last reply, but...
If you have a failed drive and install NetRAID Assistant, when you run it the program must scan all drives. Typically will hang the program when there is a failed drive.
This does not occur if you have NetRAID Assistant installed under Windows before the drive failure occurs.