topic Re: Netserver LH3 in Netservers

Netserver LH3

Rob Kent — Mon, 21 Jun 2004 06:18:22 GMT

I am continally getting on start up a new hardware found wizard looking for drivers for a PCI memory controller.
I cannot find any drivers that seem to fit the bill, does anyone have any idea what it is looking for?
Netserver LH3 P11 400 Win2k Adv Serv SP4

Re: Netserver LH3

kris rombauts — Tue, 22 Jun 2004 01:47:32 GMT

Hello Rob,

try to load this dummy inf file that you can find on the web in the Netraid driver package for LH3 or on the Navigator cdrom. It is in fact the embedded Netraid controller that is seen as a extra PCI device and to properly give it a placeholder in device manager, their is a .inf file available that loads a dummy driver.

Their is no H/W problem at all but the new device wizard pop up is enoying.

On the Navigator CD it is located in :
\periph\netraid\w2k\ultra2\nodev8ld.inf

and i also attached it to this reply

HTH

Kris

Re: Netserver LH3

amhakassa — Tue, 22 Jun 2004 08:17:36 GMT

Hi Rob,

This event occurs when the embedded HP NetRAID is disabled in the Netserver BIOS.
Therefore, if you do not have any other reason to disable the embeded raid controller, Enable embedded NetRAID in BIOS setup by pressing F2 in POST. This removes the "PCI memory controller" device in Device Manager.

I hope this will help

Regards
Amha Kassa

Re: Netserver LH3

Raven Cecil_1 — Thu, 15 Jul 2004 17:54:10 GMT

Hi Amha,

Does this issue also work with ML370s? I am seeing the same PCI Memory Controller device in my device manager.

Warm Regards,

Raven