https://community.hpe.com/t5/netservers/lp2000r-network-teaming/m-p/3384693#M7220 Lan adapter are at 100Mb/S and it is the standard which said that the burt rate and the fisical signals will work at 100Mb/s, even when you work at 50% of the troughput, the protocol will always see that it work at 100Mb/s, with load balancing you can have 100 plus 100, but it will always be referenced a 100 MB/s.<BR />you have to mesure the ammount of data send across your lan to have the bandwith used.<BR /><BR /> Sat, 25 Sep 2004 10:17:58 GMT Marino Meloni_1 2004-09-25T10:17:58Z https://community.hpe.com/t5/netservers/lp2000r-network-teaming/m-p/3384692#M7219 Hello all,<BR /><BR />Have a little problem with the network cards on our LP2000r which are Intel 82559 10/100 TX PCI LAN running on a win2k box. Having set both network cards to 100 full duplex, when using proset II to team them in load balancing, i still remain at 100 Mbps and not 200 Mbps as i would like.<BR />Any ideas as to what i am doing wrong or what the problem could be?<BR /><BR />Many thanks in advance.<BR /><BR />Mark Wed, 22 Sep 2004 14:26:16 GMT https://community.hpe.com/t5/netservers/lp2000r-network-teaming/m-p/3384692#M7219 Mark_416 2004-09-22T14:26:16Z https://community.hpe.com/t5/netservers/lp2000r-network-teaming/m-p/3384693#M7220 Lan adapter are at 100Mb/S and it is the standard which said that the burt rate and the fisical signals will work at 100Mb/s, even when you work at 50% of the troughput, the protocol will always see that it work at 100Mb/s, with load balancing you can have 100 plus 100, but it will always be referenced a 100 MB/s.<BR />you have to mesure the ammount of data send across your lan to have the bandwith used.<BR /><BR /> Sat, 25 Sep 2004 10:17:58 GMT https://community.hpe.com/t5/netservers/lp2000r-network-teaming/m-p/3384693#M7220 Marino Meloni_1 2004-09-25T10:17:58Z