https://community.hpe.com/t5/netservers/raid-crash-hp-netserver/m-p/3390414#M7238 Rak,<BR /><BR />When you replace the netraid controller with the same model, you'll get an nvram/disk mismatch on boot. Go into Ctrl-M and save disk view from configure, view add delete<BR /><BR />Ciao,<BR />Greg Thu, 30 Sep 2004 10:30:16 GMT Greg Carlson 2004-09-30T10:30:16Z https://community.hpe.com/t5/netservers/raid-crash-hp-netserver/m-p/3390413#M7237 Hello,<BR /><BR />we have a faulty Raidcontroller (HP Netraid) in our HP Netserver LH2. Now we have no access to our RAID 5 disk system. Is where a way to restore the Raid information from the existing disk drives to another new Raid Controller (same Typ). Where are the raid information stored, on the controller, or on the disks as well?<BR /><BR />Thanks for advice Thu, 30 Sep 2004 03:48:54 GMT https://community.hpe.com/t5/netservers/raid-crash-hp-netserver/m-p/3390413#M7237 Rak_2 2004-09-30T03:48:54Z https://community.hpe.com/t5/netservers/raid-crash-hp-netserver/m-p/3390414#M7238 Rak,<BR /><BR />When you replace the netraid controller with the same model, you'll get an nvram/disk mismatch on boot. Go into Ctrl-M and save disk view from configure, view add delete<BR /><BR />Ciao,<BR />Greg Thu, 30 Sep 2004 10:30:16 GMT https://community.hpe.com/t5/netservers/raid-crash-hp-netserver/m-p/3390414#M7238 Greg Carlson 2004-09-30T10:30:16Z